1.
CAPM SYSTEM OF ASSEMBLY & WELDING FOR WELDED STRUCTURE OF CONSTRUCTION MACHINERY
工程机械焊接结构件装焊工艺流程及数据管理系统
2.
Valve body shall have solder ends and 3-pc. design permitting disassembly for brazing installation.
阀体应该是焊接连接,三件式结构,便于铜焊安装时的拆卸。
3.
Component installation of nodes connected by bolts or welding required inspection Connections after passing before welding or fastening.
构件安装采用焊接或螺栓连接的节点,需检查连接节点,合格后方能进行焊接或紧固.
4.
The Study of the Horizontal Residual Stresses of the Butt Welded Joint of Steel Member;
钢构件对接焊焊缝横向残余应力研究
5.
Silver Brazing Method: Assemble parts to be brazed.
银钎焊的方法：对需要进行钎焊的部件进行组装。
6.
Effects of the Size Parameters of Flip-chip Device on Low-K Layer and Solder Joints Reliability
倒装焊器件尺寸参数对低k层及焊点的影响
7.
assemble parts to be brazed.
对需要进行钎焊的部件进行组装。
8.
Reliability of SOP Component Solder Joint
小尺寸封装(SOP)器件焊点可靠性研究
9.
Weldig deformation of hyperbolic sheet structure made of titanium alloy
钛合金双曲薄板焊接结构件的焊接变形
10.
Thick Plate Weld Technique in the Large-Scale Steel Framed of Plant Building
厂房大型钢结构厚板构件的焊接技术
11.
Thermal Performance Research on Electronics Packaging Component Based on Flip Bonding;
基于倒装焊接的电子封装器件热性能的研究
12.
Welding Quality Control of Industrial Plants to Install Steel
工业厂房钢结构安装的焊接质量控制
13.
Bending deformation：The component bends in one side after welding.
弯曲变形：构件焊后朝一侧弯曲的变形。
14.
Utilizing Tolerance“Upper Limit”of Steel Structural Parts for Controlling Welding Deformation
利用钢构件公差“上限”控制焊接变形
15.
Study on the Distributed CAPP System of Large Structure Weldment;
大型结构焊件分布式CAPP系统的研究
16.
Numerical Simulation of TA15 Titanium Alloy Components during TIG Welding;
TA15钛合金构件TIG焊接过程的数值模拟
17.
Renovate the Welded Structure and Welding Technique of the Hydraulic Oil Tank to Improve the Cleanliness of the Oil Tank
改进装载机液压油箱焊接结构和焊接工艺提高油箱清洁度
18.
Solder paste is applying for the connection between the mount components foot and PCB pads in the SMT assembly.
在表面贴装装配的回流焊接中，锡膏用于表面贴装元件的引脚或端子与焊盘之间的连接。