1.
On Influence of Welded Joint on Fracture Parameter with Crack in Different Location
裂纹位置对焊接接头断裂参量的影响
2.
Except for a small length of web at the first fracture location, none of the cracks exhibited a brittle fracture mode of crack propagation.
除第一个断裂位置的一小段腹板外，没有一条裂纹显示出裂纹扩展的脆性断裂模式。
3.
The position of the last crack is marked before unloading the beam.
标出最后一条裂纹的位置，然后卸去载荷。
4.
Effect of Position of Ultrasonic Excitation Source on Thermosonic Image of Cracks
超声源的位置对激发裂纹热成像的影响
5.
Impact of Relative Spatial Location between Crack-like Defect and MF on MLF Detection
表面类裂纹缺陷与地磁场相对空间位置对漏磁场检测的影响
6.
Relationship between stress distribution along slant crack and opening displacement on crack-surface
倾斜裂纹的应力分布与裂纹面开口位移的关系
7.
Thus wiping the ink off the image areas and onto the non-image areas of the papers.
使印纹上的墨擦抹到非印纹位置上。
8.
Interaction between offset parallel cracks and combination conditions
平行偏置裂纹相互作用及其合并条件
9.
Detection of Notch Crack Initiation and Propagation by DC Potential Drop Method
缺口裂纹起裂和扩展检测的直流电位法
10.
AN EXPERIMENTAL STUDY OF OUT-PLANE DISPLACEMENTFIELD NEAR THE TIP OF A THROUGH CRACKIN A PLATE UNDER BENDING
含穿透裂纹平板受弯时裂纹尖端离面位移场的实验研究
11.
CONTINOUS DISLOCATION DISTRIBUTION MODEL OF MODE Ⅲ INTERFACE CRACK UNDER HOMOGENOUSLY DISTRIBUTED SURFACE LOAD
裂纹面受均布载荷作用的Ⅲ型界面裂纹的位错连续分布模型
12.
All holes were positioned at the tip of the crack.
所有的铝孔都位于裂纹的尖端。
13.
Research on Fingerprint Based WLAN Indoor Location Method
基于位置指纹的WLAN室内定位方法研究
14.
Analysis of Crack on the Pipeline of ARDS Reactor and Safety Measure
加氢装置反应器管线裂纹分析及安全对策
15.
Corrosion Resistance of Bellow Materials for Catalytic Cracking Unit
催化裂化装置用波纹管材料的耐蚀性能研究
16.
Study on Method and Equipment for Detecting Casting Defects Based on Audio Frequency Inspection;
铸件裂纹缺陷音频检测方法与装置研究
17.
Study of Using Biaxial Prestressing to Control Welding Distortion and Prevent Hot Cracking;
双向预置应力控制焊接变形及防止热裂纹研究
18.
NUMERICAL SIMULATION OF 3-D INCLINED SEMICIRCLE SURFACE CRACK PROPAGATION
三维斜置半圆形表面裂纹扩展数值模拟