1.
Study on Virtual Instrumentation of Low Speed Heavy Load Large Bearing s Fault Diagnosis;
低速重载轴承故障诊断的虚拟仪器研究
2.
Research on Failure Diagnosis of Low-Speed Over-Loading Bearing Using Wavelet Theory
基于小波理论的低速重载轴承的故障诊断研究
3.
The Research on the Methods for Condition Monitor and Life Valuation of Low Speed and Heavy Load Rolling Bearings;
低速重载滚动轴承的状态监测与寿命预测方法研究
4.
Simulation Analysis on Working Characteristics of High-Speed Rolling Bearings under High Pulsating Load;
高速脉动重载滚动轴承工作特性仿真分析
5.
Research on a Controllable Preload Method of High Frequency Spindles with Characteristics of Low-Speed Heavy and High-Speed Light Loads
兼顾低速重载和高速轻载电主轴的可控预紧方法研究
6.
Load carrying ability of tapered roller bearing on new high speed rock bit
新型高速牙轮钻头圆锥滚子轴承承载能力分析
7.
The Research and Development of Large-Scale Burden Bearing CAD System;
大型重载轴承CAD系统的研究与开发
8.
This bearing limit rotational speed is low, (therefore mainly applies on the mill calls rolling mill bearing).
该轴承极限转速较低，主要应用于轧钢机上（故称轧机轴承）。
9.
The Simulation of the Dynamics of Bearing Based on ARM & DSP;
基于ARM和DSP的轴承变载变速模拟试验系统研发
10.
Development of the Loaded State of Oil Film of Wire Stock High-speed Rolling Mill and Simulation Test System;
线材高速轧机油膜轴承承载状态与仿真测试系统开发
11.
Preparation and Tribological Behavior of a Heavily Loaded 40Cr-PTFE Composite Bearings;
40Cr-PTFE重载复合材料轴承的制备及摩擦磨损特性
12.
The Design of Orifice Compensated Hydrostatic Bearing on Over Loading Crankshaft of Oxygen Compressor
氧气压缩机重载荷曲轴用小孔节流静压轴承的设计
13.
Research and Development of On-line Monitoring for Low Speed and Heavy Load Machinery
低速重载机械在线监测系统开发研究
14.
Condition Monitoring and Fault Diagnosis of Low-speed and Heavy-duty Machine
低速重载机械的状态监测与故障诊断
15.
Total Weight (Less Bearing)
总重量(较少轴承)
16.
The method of load distribution of bottom bracing is adopted to change support rigidity,so that the bush vibration is reduced.
采用底脚载荷分配的方法改变了支承刚度 ,从而降低了轴瓦振动。
17.
bearing preload indicator
检验轴承预载示功器
18.
Replace cracked case; examine gears and bearings for possible damagAvoid excessive weight on vehicle.
更换断裂的差速箱；检查齿轮和轴承是否损坏。避免车辆过载。