1.
Connection Technology and Practice of Steel Bar Cold Pressing by Newly Developed Toothed Mould
新型梅花齿形钢筋冷压连接工艺与实践
2.
Study on the Numerical Simulation and Bonding Mechanism in Cold Pressure Welding of Different Metal;
异种金属冷压焊焊接过程数值模拟及连接机理的研究
3.
Experimental Investigation on Load-carrying Capacities of Eccentrically-compressed Members and Self-drilling Screw Shear Connections of Cold-formed Thin-Walled Steel Structures;
冷弯薄壁型钢偏压构件及自攻螺钉连接承载力试验研究
4.
joint contact surface
连接接触面总压紧载荷
5.
Lock the hydraulic connector and test the connecting force with 50.000 lbs overpull.
销紧液压连接器用50000磅试验连接拉力。
6.
CONNECT AN OIL PRESSURE GAUGE IN ITS PLACE.
在这个位置连接油压计。
7.
Connect brake booster hose.
连接刹车增压器软管。
8.
The 3-roll calender includes the em-bossing and the take-off and cooling units.
3辊压延机带有压花、接取和冷却机构。
9.
Effect of Bonding Pressure on Transient Liquid Phase Bonding Process and Joint Properties of T91/12Cr2MoWVTiB
连接压力对TLP连接T91/12Cr2MoWVTiB过程及接头性能的影响
10.
Eliminates the need for external connection of cooling water or other fluids.
不需要在外连接冷却水或其它冷却液体。
11.
Variable Hydraulic Stiffness in the Gauge Control for a Tandem Cold Mill;
冷连轧机辊缝控制的液压变刚度问题
12.
Study on Modelling and Simulation of Cold Continuous Rolling Mill;
冷连轧机压下系统建模及仿真的研究
13.
Study on rapid solidification welding techniques of quenched Cu-Sn alloy foils
急冷Cu-Sn合金箔快速凝固连接工艺
14.
RECONNECT THE HYDRAULIC CONTROL UNIT 6-WAY CONNECTOR.
重新连接液压控制单元６路接头
15.
crimp-and-cleave lensed fiber optic connector
压接-切割式透镜型光纤连接器
16.
THEORETICAL STUDY ON THE OPTIMAL BACK-PRESSURE OF A DIRECT AIR-COOLED CONDENSER
直接空冷凝汽器理论最佳背压的研究
17.
Measurement of Flow Field Behind the Last Stage in a 300MW Direct Air-Cooling LP Turbine
300MW直接空冷汽轮机低压末级流场测量
18.
Experimental study on compression-diffusion composite connection of Cu/Al joint
铜铝接头压接-扩散复合连接工艺及试验