1.
Recognition of Insulator Crack Types Based on Neural Network and the Invariant Moment;
基于神经网络和不变矩的绝缘子裂纹类型识别
2.
Element Size and Type Optimization and Simulation of Fatigue Crack Propagation of 16MnR Steel;
16MnR钢疲劳裂纹扩展数值模拟和单元类型尺寸优化
3.
A crack surface displacement of four-point-bend specimen under three types of loading is studied in this paper.
研究了四点弯曲型试件在各种类型载荷作用下的裂纹面位移，并考虑了裂纹尖端塑性区对它的影响。
4.
A calculation model for 3-D blunt cracks in proposed and the corresponding boundary element method(BEM)computer program system is also established.
提出了一个三维钝裂纹的计算模型，并建立了适用于这类模型的边界元法程序。
5.
A craze is a thin platelike region.
小裂纹是一个类似薄片的区域。
6.
On a Class of Method for Solving Problems with Random Boundary Notches and/or Cracks--(Ⅲ) Computations for Boundary Cracks
关于任意边界缺口或裂纹群问题的一类解法——(Ⅲ)边界裂纹群的计算
7.
Pressing sheet metal forming, its substrate should be crack.
压型金属板成型后，其基板不应有裂纹。
8.
A propagation problem on dynamic Dugdale model of mode III crack
Ⅲ型裂纹动态Dugdale模型的扩展问题
9.
CONTINOUS DISLOCATION DISTRIBUTION MODEL OF MODE Ⅲ INTERFACE CRACK UNDER HOMOGENOUSLY DISTRIBUTED SURFACE LOAD
裂纹面受均布载荷作用的Ⅲ型界面裂纹的位错连续分布模型
10.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
11.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
12.
Cracking analysis on corner-inclusive shearing fractures for rubber vibration-reduction spacers
含角裂纹剪切型橡胶减振垫的断裂分析
13.
Analysis of the Main Stress Invariants Criterions for Mixed Mode Crack Initiation Angles
混合型裂纹应力不变量断裂准则的分析
14.
In the tie girder boxes crack growth was detected near the crack tip.
在系杆箱型梁中裂纹尖端附近检测到裂纹的扩展。
15.
Near Crack Line Plastoehstic Andysis of mode ⅢEdge Cracked Plates LoadedbyPoint Forces
Ⅲ型边裂纹受一对集中力时裂纹线场的弹塑性分析
16.
EFFECTIVE MODULI OF AN ELASTIC SOLID WEAKENED BY A PARALLEL ARRAY OF MICROCRACKS
平行微裂纹削弱的弹性体的各向异性有效性能与双周期裂纹模型
17.
BEM Model of ultrasonic scattering field for penny-shaped crack in solid
固体中币形裂纹散射声场边界元模型
18.
Antiplane Yoffe-type Moving Crack in Functionally-graded Materials;
功能梯度材料中反平面Yoffe型运动裂纹