说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 镀钴
1.
Cobalt-tungsten electrodeposit as copper barrier was presented in the paper.
本文提出以电镀钴钨二元合金镀层作为防铜渗层。
2.
Current Status and Development Trend of Electroplated Cobalt Alloy and Composite Coatings as Replacements of Electroplated Hard Chromium Coatings
替代硬铬的镀钴合金及其复合镀层的研究现状及展望
3.
Spectrophotometric determination of cobalt in tin–cobalt alloy plating solution with picramazochrom
分光光度法测定锡钴合金镀液中的钴
4.
Magnetic cobalt-boron alloy deposits were prepared by electrolessplating.
采用化学镀制得钴硼磁性合金镀层。
5.
Improving of quantitative analysis about Co content in Ni-Co electroplating solution
镍钴电镀液中钴含量容量分析法的改进
6.
Rapid Determination of Micro Cobalt in New Bright Sn-Pb-Co Alloy Plating Bath
新型光亮镀锡铅钴合金镀液中微量钴的快速测定
7.
Internal Stress and Co Content of Pulse Electrodeposited Ni-Co Alloy Coatings
脉冲镀Ni-Co合金镀层内应力及钴含量的研究
8.
Spectrophotometric determination of cobalt in bright nickel plating bath
分光光度法测定光亮镀镍溶液中的钴
9.
Application study of cobalt salt as a passivating agent without chromium on tin plate
钴盐在镀锡板无铬钝化中的应用研究
10.
The diamond wheel for grinding magnet shoe with low sagitta was manufactured by composite electroplating in Ni-Co alloy electrolyte.
采用镍-钴合金镀液电镀出磨低拱高磁瓦的金刚石砂轮。
11.
Soluble zinc and insoluble low carbon steel anodes are used for alkaline zinc-cobalt plating.
碱性锌钴合金电镀常采用锌阳极和低碳钢阳极。
12.
A NEW HYPOTHETICAL MECHANISM FOR ORGANIC COBALT COMPLEX TO PROMOTE THE NR/BRASS-PLATED STEEL CORD ADHESION
有机钴盐增进橡胶/镀铜钢丝粘合的新机理假设
13.
Study on Mechanical Performance of High Frequency Pulse Electroforming Ni-Co Alloy;
高频脉冲电镀镍钴合金机械性能的研究
14.
Effect of Ni and Co in Zn Bath on the Microstructure and Growth Kinetics of Galvanized Coating of Si-containing Steel
镍和钴对反应钢镀锌组织和生长动力学的影响
15.
Study on Corrosion Resistance of High Frequency Pulse Electrodeposited Ni-Co Alloy
高频脉冲电沉积镍-钴合金镀层的耐蚀性
16.
The Latest Development of Research and Application on Electroless Crystal Co-P Alloy
化学镀晶态钴磷合金的研究及应用现状
17.
MICROHARDNESS OF Ni-Co ALLOY PLATED BY HIGH FREQUENCY PULSE CURRENTS
高频脉冲电沉积镍钴合金镀层的硬度研究
18.
Concentration of potassium pyrophosphate is usually measured by means of gravimetry and titration in tin-cobalt electrolyte, but the measuring procedures are very complicated.
锡钴合金镀液中焦磷酸钾的测定常采用重量法或滴定法。