1.
Analyse of SPT and Boring Sample Test of Deep Mixing Piles;
深层搅拌桩标准贯入及取芯试验分析
2.
Experimental Research on the Seismic Behavior of Reinforced Concrete Beam-column Joints Constructed with Beam Concrete by Improved Measures;
采取改进措施的夹芯节点抗震性能试验研究
3.
EXPERIMENTAL RESEARCH ON CORNCOB FAST PYROLYSIS FOR BIO-OIL IN A FLUIDIZED BED REACTOR
玉米芯流化床快速热解制取生物油试验研究
4.
DEVELOPMENT AND TESTS OF LOW-TEMPERATURE ELECTROPLATED81/2" PDC CORING OIL BITS
低温电铸8(1/2)″复合片取芯油井钻头的研制与试验
5.
d core testing stand
散热器及芯子试验台
6.
A core was removed from this area so that the crack surfaces could be examined.
从这一区域取样芯，以便检验裂纹表面。
7.
Optimal Test Access Chain Configuration for Reusing NoC to Test IP Cores
复用NoC测试IP芯核测试存取链优化配置
8.
Conveyor belts--Carcass tear resistance--Method of test
GB/T7985-1987输送带带芯抗撕裂性试验方法
9.
Test method for tyre valve core
GB/T9767-1994轮胎气门芯试验方法
10.
testing methods for pile abrasive retention of corduroy fabrics
灯芯绒织物的pile保持力试验法
11.
testing method of steel cord conveyor belts
钢丝绳芯输送带试验方法
12.
testing method for adhesion of rubber to steel cord
橡胶和钢丝绳芯粘合试验方法
13.
Heat Balance Test for Determined Reactor Core Power
计算核反应堆堆芯功率的热平衡试验
14.
Core Stable Flowrate Distribution of High Flux Engineering Test Reactor(HFETR)
高通量工程试验堆堆芯流量分配计算
15.
The Study on 80 Fuel Assemblies Core for HFETR
高通量工程试验堆80盒元件堆芯研究
16.
Simulate experimental study on bending bearing capacity of the colour steel sandwich panel
彩钢夹芯板受弯承载力模拟试验研究
17.
Experimental Research and Theoretical Analysis for the Honeycombed-core Floor with Four Edges Clamped;
四边固定蜂巢芯楼盖试验及理论研究
18.
Simulation and Test for PDVQ Image Compression Chip;
PDVQ图像压缩芯片仿真验证及测试