1.
Control of monitoring and measuring devices
监视和测量装置的控制
2.
Talking about the verification thought of "control of surveillance and measuring devices"
浅谈“监视和测量装置的控制”审核思路
3.
The organization shall determine the monitoring and measurement to be undertaken and the monitoring and measuring devices needed to provide evidence of conformity of product to determined requirements.
组织应确定需实施的监视和测量,以及所需的监视和测量装置产品符合确定的要求,提供证据.
4.
Decide the precision required for the monitoring and measuring tasks. Chose proper monitoring and measuring device.
应确定监视和测量任务所要求的准确度,选择相适用的监视和测量装置.
5.
Controlling Difficulty Analyses of Monitor and Measurement Devices in the Qulity Management System Requirement;
《质量管理体系要求》中监视和测量装置的控制难点分析
6.
Controlled conditions shall include the availability and use of monitoring and measuring devices, as applicable.
适用时受控条件应包括获得和使用监视和测量装置
7.
the availability of work instructions, as necessary,the use of suitable equipment,the availability and use of monitoring and measuring devices,
必要时，获得作业指导书；使用适宜的设备；获得和使用监视和测量装置；
8.
Work out and implement the calibration period of monitoring and measuring device.
制订并实施监视、测量装置的校正周期.
9.
Use suitable production equipment and proper monitoring and measuring devices required by the processes.
使用合适的生产设备和/或配备过程中所需要的监视和测量的装置.
10.
for verification of process outputs in order to minimize the need for control of measuring and monitoring devices, and to add value for interested parties.
从而将测量和监视装置的控制需求减到最小，为相关方增值。
11.
Design of a power quality monitoring device based on DSP and CPLD
基于DSP和CPLD电能质量监测装置的设计
12.
In order to provide confidence in data, the measuring and monitoring processes should include confirmation that the devices are fit for use
为了获得可信的数据，测量和监视过程应当包括对装置是否适用的确认，
13.
Avoid invalid calibration due to mis-adjustment of monitoring and measuring device and ensure its accuracy and applicability during handling and storage.
防止监视、测量装置因调整不当而使其校准失效,确保搬运贮存时其准确度和适用性保持良好。
14.
In case the monitoring and measuring device is found off calibration status, the effectiveness of inspected and tested products shall be evaluated.
发现监视、测量装置偏离校准状态时,应评定已检验和试验的产品的有效性.
15.
Development of Coal Seam Injection Water Flow Monitoring and Control Device
煤层注水流量监测监控装置的研制
16.
The Quality Department shall guarantee those devices have been verified and they are still within validity period.
质量部确保使用的监测和测量装置必须是经检定并在有效期内。
17.
Put proper identification to the calibrated monitoring and measuring device to specify its calibration status.
经检定的监视、测量装置须确定相关标识,以确定其校准状态.
18.
graphicrecorder and measuring unit
图形记录器和测量装置