1.
Aligning main engine's crank shaft and intermediate shaft after launching.
下水后主机曲轴和中间轴连接后校中。
2.
crankshaft (main journal turning lathe)
曲轴（主轴颈）车床
3.
Analytical Investigation on Strength and Main Bearing Lubrication of CA4D32 Diesel Engine Crankshaft System Based on a Simulation Technique;
柴油机曲轴轴系强度和主轴承润滑仿真研究
4.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
5.
"This section describes the servicing of crankshafts, main bearings, and engine Blocks and cylinders."
本节介绍曲轴、主轴承、发动机机体和气缸的维修。
6.
Study on Load Analysis Method for Diesel Engine Crankshaft Main Bearing Based on ADAMS;
基于ADMAS的柴油机曲轴主轴承载荷分析方法研究
7.
Study on Lubricating Characteristics of Crankshaft Main Bearing for High-duty Diesel
高强化柴油机曲轴主轴承润滑特性研究
8.
Measuring deflection of crank shaft of M.E. before starting up(after sea trial).
主机动车前（航行试验后）曲轴甩档测量。
9.
Innovations Of The Mechanical Processing Techniques Of The Main Journal Of G6135Z Crankshaft;
G6135Z曲轴主颈机加工工艺改进
10.
Crankshaft main journal out of round or worn
曲轴主轴颈不圆或磨损
11.
The feed holes for the crankshaft main bearings.
曲轴主轴承进入口。
12.
Crankshaft and main bearings service
曲轴和主轴承的维修
13.
crankshaft journal face hardening machine
曲轴轴颈表面淬火机床
14.
crankshaft journal milling machine
曲轴轴颈铣削专用机床
15.
A shaft that turns or is turned by a crank.
机轴用曲柄来转动的轴
16.
Thus a normal loom has two shafts. The main shaft(crankshaft or top shaft) drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样,普通织机应具备两根轴,主轴(曲拐轴或位于上部的轴)驱动筘座并通过齿轮驱动另一根轴。
17.
"On many engines, the connection-rod and main bearings (crankshaft bearings) can be checked for wear with an oil-leak detector before the engine is torn down."
许多发动机在拆卸之前,可以用漏油检测装置检查连杆和主轴承(曲轴轴承)的磨损情况。
18.
crankcase bottom half
发动机曲轴箱的下半部