1.
The method is also proposed on making thread-hole and bolt in interving concerted process, bolt connection as well.
干涉配合螺接过程中螺孔和螺栓的加工方法以及螺栓的安装方法。
2.
The wire thread insert used in screw hole of the blade
关于钢丝螺套在削片机刀片螺孔中的应用
3.
tap(ping) drill
螺丝孔钻，螺丝底孔钻
4.
eye bolt link hanger
眼孔螺栓连结摇枕吊
5.
balance wheel oil cover screw
平衡轮注油孔盖螺丝
6.
Round nuts with drilled holes in one face
GB/T815-1988端面带孔圆螺母
7.
Round nuts with set pin holes in side
GB/T816-1988侧面带孔圆螺母
8.
To drive(a screw or bolt)into a countersink.
将钻或螺栓置入埋头孔
9.
The holes for the Bolts register perfectly.
螺栓的孔眼完全合适。
10.
bolt or cotter-pin drill
螺栓或开尾销孔钻头
11.
Remove screws at wheel opening.
拆卸车轮孔处的螺丝。
12.
hydraulic gait-model all-auger drilling machine
液压步履式螺旋钻孔机
13.
counterbore for hexagon socket head bolt
内六角头螺栓埋头孔
14.
untapped nut of iron or steel
未开孔螺帽,铁或钢制
15.
Hexagon fit bolts with Split pin hole on shank--Product grade A and B
Gb/T28-1988六角头螺杆带孔铰制孔用螺栓A和bb>级b>
16.
insert(a screw or bolt)into such an enlarged hole
将（螺钉或螺栓）旋入埋头孔中.
17.
" Bolts, small hexagon head with fit neck and hole through the shank"
GB/T24-1976小六角头螺杆带孔导颈螺栓
18.
" Bolts, small hexagon head with hole through the shank"
GB/T23-1976小六角头螺杆带孔螺栓