说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 28°压力角直齿轮
1.
Stress analysis for involute spur gear with 28 degree pressure angle
渐开线28°压力角直齿轮应力分析
2.
Stress Analysis and Tooth Profile Optimization of Asymmetric Involute Gear with Two Pressure Angles;
双压力角非对称渐开线直齿轮的应力分析及齿廓曲线的优化
3.
The range of gears cut by the hob of small pressure angle
小压力角滚刀加工齿轮的齿数范围
4.
Vibration Analysis of Involute Gear with Unsymmetric Teeth and Double Pressure Angles
双压力角非对称齿廓渐开线齿轮的振动分析
5.
rack and pinion press
齿轮齿条传动压力机
6.
Bevel gears: gears which connect two shafts at right angles.
伞齿轮:连接直角相交两轴的齿轮。
7.
Research on the Transmission Design and Investigation on Load Capacity of Asymmetric Gear with Two Pressure Angles;
双压力角非对称齿轮啮合特性及应力分析研究
8.
Analysis of Skewed Tooth Bevel Gear and Straight Tooth Bevel Gear
斜齿圆锥齿轮与直齿圆锥齿轮应力分析研究
9.
The Practical Involute Equation under Cartesian Coordinates System
齿轮轮齿齿廓渐开线的实用直角坐标方程研究
10.
straight-cut gear
直齿圆柱齿轮,正齿齿轮
11.
Finite element analysis on the dynamic stress at the tooth root of a spur bevel gear
直齿圆锥齿轮齿根动应力有限元分析
12.
twin-geared press
双边齿轮驱动压力机
13.
geared reducing press
齿轮传动拉延压力机
14.
increment angle
(圆锥齿轮)齿端角
15.
Investigation on Meshing Theory and Load Capacity of High Performance Unsymmetric Gear with Double Pressure Angles;
高性能双压力角非对称齿轮传动啮合机理及承载能力研究
16.
Accordingly,the least teeth number without undercutting is also decided only by the design pressure angle of the gear,without any relation to the coefficient of addendum height of the gear.
相应的无根切最少齿数也仅取决于正弦齿轮的设计压力角,而与齿顶高系数值无关.
17.
Finite element analysis on root stress of involute cylindrical spur gears
渐开线直齿圆柱齿轮齿根应力的有限元分析
18.
straight and conical gear shaper
直齿-锥齿轮刨齿机