1.
Modularization Development of Pre-and Post-Processors of CAE Software KMAS for Sheet Forming Based on COM;
板材成形CAE软件KMAS前后处理器的COM组件化开发
2.
The Research and Development of Net3DBrowser IGES Postprocessor;
三维图形浏览系统IGES后处理器的研究与实现
3.
Secondary Development and Application of Preprocessor and Postprocessor Based on Finite Element Method;
基于有限元法的前后处理器的二次开发及应用
4.
Analysis of Performance and Regeneration Process on the Diesel Particulate Filter
柴油机微粒后处理器性能与再生过程分析
5.
A Study on Plasma Aftertreatment Device for Diesel Engine by Bench Test
柴油机等离子体后处理器台架试验研究
6.
Carefully place the CPU into the socket.
最后再将中央处理器置入处理器插座中。
7.
(4)The parameter general post processor is adopted.
(4) 后置处理采用参数化的通用后置处理器；
8.
Drag onto the page, then right-click to make a processor.
拖到绘图页上，然后右击可构成处理器。
9.
The Design of Postprocessor for Five-axis Machine Tool Based on UG/Postbuilder
基于UG/Postbuilder的五轴后置处理器设计
10.
Design of Signal Processing Circuit for SAW Sensor
SAW传感器后端信号处理电路的设计
11.
The Secondary Development to the Post Processor of MasterCAM Based on SINUMERIK802D
基于SINUMERIK802D的MasterCAM后置处理器二次开发
12.
Close the socket by lowering and locking the lever.
当中央处理器已确实装载在处理器插座内后,再将固定扳手扳回。
13.
Notifies the filter when the server has finished processing a request.
服务器完成对请求的处理后通知筛选器。
14.
Error Analysis of Integrated Calculation Amplifier after Idealized Treatment;
集成运算放大器理想化处理后的误差分析
15.
How to Deal with the Feed Rate in Designing the Post Processor System
后置处理器系统设计中进给速度处理方法的研究
16.
Later, following a RUN command, the program is given control of the processor.
接着，在RUN命令之后，处理器就执行该程序了。
17.
Disable write-behind caching for all drives.
禁用所有驱动器的后写式高速缓存处理
18.
Graphics cards take data from the CPU and turn it into pictures.
显卡先从中央处理器读取数据然后再转成画面。