1.
Experiments of Driven Pile Control for Static Pressure on PHC Pipe Pile
静压式预应力高强度混凝土管桩沉桩控制压桩力的试验分析
2.
Study on Mechanism and Resistance in the Process of Driving Pretest Piles;
预压托换桩的压桩机理与压桩阻力研究
3.
FORCE ANALYSIS OF VALVE CLACK IMMERSED TUBE FOR PILE WITH PLATES
压扩支盘桩的桩尖阀瓣扩压受力分析
4.
Finite Element Analysis of Pile Clamping Box of Hydraulic Static Pile Driver
液压静力压桩机夹桩箱的有限元分析
5.
Study of Sinking-resistance and Compaction Effect of Static-press Pile;
静压桩施工沉桩阻力及沉桩挤土效应研究
6.
The Dynamical Examination and Judgement of Perfusion Stake Base with Jamming Slurry on Stake End;
桩端后压浆灌注桩桩基动力的检测与评定
7.
Research on Excess Pore Water Pressure Which is Induced by Jacking of PHC Pile;
PHC管桩沉桩引起的超孔隙水压力研究
8.
Comparison of several calculation methods of static pressure pile sinking resistance pressure
几种计算静压桩沉桩阻力方法的比较
9.
Study on estimating method of static jacked resistance of precast piles;
粉砂土地区静压预制桩压桩阻力的预估和研究
10.
Pile clamping mechanism of hydraulic static pile driver based on ANSYS
液压静力压桩机夹桩机构的有限元分析
11.
TECHNIQUE OF POST GROUTING PILE(7) --FACTORS AFFECTING THE VERTICAL COMPRESSIVE BEARING CAPACITY OF PILES BY TIP AND SKIN GROUTING
后注浆桩技术(7)——影响桩端桩侧联合注浆桩竖向抗压承载力的因素
12.
The bearing capacity characteristic value of a single pile can be increased greatly through post pressure grouting from pile sides and bottom.
通过对桩侧和桩底后压浆，可大幅度提高钻孔灌注桩单桩承载力。
13.
Quality control of the static pressed pile of high strength prestressed concrete pipe pile
高强度预应力混凝土管桩静力压桩的质量控制
14.
Research on the Use of Later Low-pressure Grouting to the Drilling Hole Pour Pile;
钻孔灌注桩低压力后压浆的应用研究
15.
The Analysis of Cantilever Strength of ZYB600F Hydraulic Static Pile Engine Base on Cosmos;
ZYB600F型液压静力压桩机悬臂强度的分析
16.
TECHNOLOGY OF PRESSURE GROUTING UNDER PILE TIP AT COBBLE LAYER
桩端压力灌浆工艺在卵石层灌注桩中的应用
17.
POST GROUTING PILE TECHNIQUE(5)--HE VERTICAL COMPRESSIVE BEARING CAPACITY OF POST GROUTING PILES
后注浆桩技术(5)——后注浆桩的竖向抗压承载力
18.
Theoretical Analysis of Soil Deformation Due to Piles Jacking;
静力压桩引起桩周土体变形的理论分析