1.
EVALUATION OF CHARACTERISTICS OF AMTEC WITH POTASSIUM WORKING FLUID
钾工质碱金属热电直接发电器件特性评价
2.
Basic Research on Alkali Metal Thermal-to-Electric Converter with NaK Working Fluid;
钠钾工质碱金属热电转换器的基础研究
3.
SELECTION OF CIRCULATING WORKING FLUID AND SOLID ELECTROLYTE OF AMTEC
碱金属热电转换器的循环工质和固体电解质的选择
4.
The evaluation of electrical characteristics of AMTEC was one of the several important tasks in this thesis.
计算碱金属热电转换器的特性是本文的重要任务之一。
5.
Characterization of Property Degradation of the Metallic Film Resistors under Thermal Cycling;
热循环条件下金属膜电阻器的性能退化表征
6.
In this paper, it is described how to select the electrode materials for AMTEC from the point view of chemical stability.
该文主要从化学稳定性的角度对碱金属热电转换器的电极材料的选择进行了分析
7.
Study on Production of Zirconium by Direct Electrodeoxidation of Solid Zirconium Dioxide;
直接电脱氧法由ZrO_2制备金属Zr的研究
8.
"broil:To cook by direct radiant heat, as over a grill or under an electric element."
烤,炙:由直接辐射热量烹调,如在烤架上或电器件下。
9.
To cook by direct radiant heat, as over a grill or under an electric element.
烤，炙由直接辐射热量烹调，如在烤架上或电器件下
10.
radiant flame, steam impingement on the container, immersion in a heated water bath or electrical resistance heater elements in direct contact with the container.
辐射火焰、容器上的蒸汽冲击、热水槽中的浸泡或直接接触容器的电阻加热元件。
11.
Power plant ACC system air cooler heat design procedure
直接空冷电厂的凝汽器热力计算方法
12.
electrode ,metal, for industrial electric heating equipment
工业电热设备金属电极
13.
It can generate heat if the positive and negative terminals of the batteries are accidentally contacted by a metallic object.
如果电池的正极和负极端子无意中与金属物品接触会发热。
14.
induction or electric machine for melting metal parts
感应或介质电机金属零件焊接用
15.
lighting fitting parts of non-electric of base metal
非电器照明装置配件,贱金属制
16.
Welding of electric heating element used for pressurizer
核一级设备稳压器电加热元件的焊接
17.
Electric heating elements shall be screw-in, direct-immersion, resistance-type heating elements.
电气加热元件应该螺纹拧进的，直接浸入式，电阻型加热元件。
18.
Influence of Metal/Organic Interface Barriers on the EL Efficiency in Single-layer Organic EL Devices
金属 /有机界面势垒对单层有机电致发光器件发光效率的影响(英文)