1.
Radial Deviation - A Matter of Moulding and Curing
盘片径向翘曲的原因:注塑成型和高温固化
2.
Synthesis of SrTiO_3 by Double-SHS for Immobilization of High Level Radioactive Waste
二次自蔓延高温合成SrTiO_3固化高放废物
3.
Research progress of heat resistance epoxy resin adhesive based on room temperature curable
室温固化高温使用环氧树脂胶粘剂的研究进展
4.
Development of Room Temperature Curing Epoxy Resin Modified Silicone Heat-resistant Coating
常温固化环氧改性有机硅耐高温涂料的研制
5.
Again, if there is excessive relative sliding the fluid will become too hot to solidify.
液体温度太高以致也不能固化。
6.
Study on the Solid Food Fluidization Ultra High Temperature Sterilization Technology;
固体食品流态化超高温杀菌技术研究
7.
Synthesis of Perovskite by Double-SHS for Immobilization of ~(90)Sr
二次自蔓延高温合成钙钛矿固化~(90)Sr
8.
Optimization of high-temperature solid-phase process for LiFePO_4 synthesis
LiFePO_4高温固相合成工艺优化研究
9.
Producing high-quality flavor vinegar by the process of liquid-high-temperature saccharification and solidalcoholization,acetification
液态高温糖化——固态酒化醋化工艺生产优质香醋
10.
Effects of hot NaOH on straw pre-treatment in high-solid anaerobic digestion
高温NaOH预处理对秸秆高固体厌氧消化的影响
11.
Impact of Gasification Parameters on Coal Gasification in Fixed Bed with High-Temperature Air
气化参数对固定床煤高温空气气化的影响
12.
MICROSTRUCTURE AND SOLID/LIQUID INTERFACE MORPHOLOGY EVOLUTION OF INTEGRALLY DIRECTIONALLY SOLIDIFIED Nb-SILICIDE-BASED ULTRAHIGH TEMPERATURE ALLOY
铌硅化物基超高温合金整体定向凝固组织和固/液界面形态演化
13.
Too hot machines means hardening of the rubber in the machine.
成型机温度过高极易造成液胶在机内过早固化。
14.
Self-propagation High-temperature Synthesis for Radiocative Waste Immobilization;
利用自蔓延高温合成技术固化放射性废物
15.
Study on Adhesive with Fast-speed Curing at Room Temperature and High Adhesive Force;
高附着力的室温快速固化胶粘剂的研究
16.
Microtructure Evolution of Al-In and Cu-Pb Monotectic Alloys Directionally Solidified in High Temperature Gradient;
高温度梯度定向凝固Al-In和Cu-Pb合金组织演化
17.
Study on high temperature electronic conductivity of zirconia
氧化锆固体电解质高温电子电导的研究
18.
The Analysis of Curing Kinetics of Heat Resistant Resin and Research of its Composites Performances
耐高温树脂的固化动力学分析及其力学性能