1.
Measurement of Rotation Angle and Intelligent Electronic Controller for Cam Operated Switches
旋转角的检测及智能化电子凸轮开关控制器
2.
Research and Design on Controller of Programmable Electronic Cam Switch;
一种可编程电子式凸轮开关控制器的研究与设计
3.
Relative Parameter Design of Cams of Roller Follower;
滚子从动件凸轮机构的相关参数设计
4.
Cam Optimization Design of Spring Operating Mechanism in High Voltage Switch Based on CAE Technology
基于CAE技术的高压开关弹簧机构凸轮优化设计
5.
Ferguson Cam Mechanism and the Design of Cam Surface
福开森凸轮机构及其凸轮轮廓曲面的设计
6.
motor-operated cam type flash welder
电动凸轮式闪光焊机
7.
camshaft and servomotor equipment
凸轮轴和伺服电机设备
8.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
9.
Comparative Research on Doubly-Salient Excitation Motor and SRM
电励磁双凸极电机与开关磁阻电机的对比研究
10.
As the camshaft continues to rotate, the high spot moves way from the valve mechanism.
因为凸轮轴继续旋转，凸轮轴上的凸起部分离开气门装置。
11.
Each unit has a pair of cams, with an anti - friction roller for each cam.
每两对凸轮之间有一定的间隔,每一组凸轮中包括一对凸轮,每个凸轮对应一个减摩转子。
12.
Development of Globoidal Cam CAD Integrated System Based on Different Roller Types
基于不同滚子从动件类型的弧面凸轮CAD集成系统开发
13.
"The cam lobes are so positioned on the camshaft as to cause the valves to open and close in the cylinders at the proper time with respect to the actions taking place,in the cylinders."
曲轴上凸轮凸角的位置使气门在恰当的时侯开关,以便与气缸的工作顺序相一致。
14.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
15.
THE ANALYSIS AND DESIGN OF AN INSIDE CONJUGATE CAM SHEDDING MECHANISM
内置式共轭凸轮开口机构分析与设计
16.
A CAD System of Cam Mechanisms of Autolathe;
自动车床凸轮机构CAD软件的研究开发
17.
Secondary Development for Cam Mechanism Design of the CAD System Based on SolidWorks;
基于SolidWorks下的凸轮机构CAD系统二次开发
18.
The Exploiture and Study of the System CAD/CAM of Cylindrical Cams;
圆柱凸轮CAD/CAM系统的研究与开发