1.
Structure design and tube-weld cladding manufacturing technology for copper-clad steel wire
包覆焊接法铜包钢线的结构设计和生产工艺
2.
For all processes, the Welding Procedure Specification (WPS) shall contain a detailed cleaning procedure indicating joint preparation prior to welding.
对于所有焊接方法，焊接工艺规程都应详细包含清除方法，说明焊前坡口的准备。
3.
Are AOI/ AXI complementary methods, which include solder joint inspection, used for all reflowed parts?
AOI/AXI的检验方法包括焊接点的检验,是否用于回流焊元件检测?
4.
Likelihood Ratio Identification Method for the Detection of Adhesive State of the Liner Cladded in the Rocket Motors
火箭发动机包覆粘接状态检测似然比识别方法
5.
Research on Change Rule of Cladding Rate of Hot-rolled Aluminum Matrix Brazing Sheet
热轧铝基钎焊板包覆率变化规律研究
6.
3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
3. 在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
7.
apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
8.
Coating removal of glass-coated FeCoSiB microwires by chemical method
玻璃包覆FeCoSiB微丝包覆层化学去除方法
9.
Standard for test method of welding splice of reinforced stell bar
钢筋焊接接头试验方法
10.
Preparation of Fe/Cu Bimetallic Powders by Direct Substitution Reaction
直接置换法制备包覆型铁铜双金属粉末的工艺研究
11.
oil-coating process
形成油膜包覆层的方法
12.
make(sth)by joining pieces of metal in this way
用锻焊法或焊接法制造（某物）.
13.
Nickel-Based Alloy Powder Welding Properties of Laser Cladding
镍基合金粉末的激光熔覆焊接性能研究
14.
MMA (Manual Metal Arc)
人工金属电弧焊接法
15.
new control method for MIG welding
新型mig焊接控制法
16.
Swing Welding Technology of TIG Root Welding on Heavy Thickness Pipe
厚壁管TIG根焊摇摆手法焊接技术
17.
Over-application of ZSS010 will result in increased levels of weld fume on cutting and welding, and will also increase the porosity of the welds.
如果涂覆过厚，切割和焊接时会产生大量的焊烟，并增加焊接处的孔隙。
18.
Automatic Weld Parameter Set-Up including Pnelmate screen display.
焊接参数自动设定,包括盘面屏幕显示