1.
Some propositions for prismatic coefficient Cp, ratio of breadth to draft B/T, LCB, and parameter of bulbous bow etc, as well as the measures for improving resistance and propulsion are discussed.
同时对棱形系数、宽度吃水比、浮心纵向位置、球艏的参数等提出了建议。
2.
To advance the reading or display position according to a prescribed format, for example, to advance the printing or display position horizontally to the right or vertically down.
根据规定的格式，推进读出位置或显示位置，例如横向向右或纵向向下推进打印位置或显示位置。
3.
Research of Rayleigh wave inspect the empty hole location in highway roadbed
瑞利波探测公路路基中的空洞纵横向位置研究
4.
steering wheels adjustment control
转向盘调节装置操纵件
5.
Minute vertical and lateral adjuster is built in the nozzle.
喷嘴安装横向和纵向的为调节装置。
6.
The plane systems and functions are also recorded, along with information about engine thrust and the position of control surfaces (flaps and rudder).
同时，它也记录飞机的系统和运行情况，包括发动机的推力和操纵面位置（襟翼和方向舵）。
7.
rig in which the principal sails are fore-and-aft.
是指主帆是纵向的船上的装置。
8.
On Vertical Allocation of State Power in Contemporary China
当代中国国家权力纵向配置问题研究
9.
lying away from the median and sagittal plane of a body.
所处位置远离身体的中线或者纵分面。
10.
To place in a prone position.
使倒伏置于向下的位置
11.
A device that raises and lowers the warp threads on a loom.
排成纵向在织布机上将纵向丝线升高或降低的装置
12.
" Types,positions and performance requirements for controls of motorcycles"
GB/T15366-1994摩托车操纵装置的型式、位置及基本要求
13.
a line of (usually military) units following one after another.
纵向排列的一排（通常指军事编队）单位。
14.
When you want to manoeuvre the main engine by the mechanical manoeuvring system, it is necessary to turn the handle to the“ emergency” position.
当你想要使用机械操纵系统操纵主机时，必须转动手柄到应急位置。
15.
When you want to manoeuvre the main engine by the pneumatic manoeuvring system, it is necessary to turn the handle to the“ normal” position.
当你想要通过气动操纵系统操纵主机时，必须转动手柄到正常位置。
16.
T3Manual Valve Lever Position Switch C3 Sense or Park/Neutral Position Switch Sense circuit.
＊＊Ｔ３＝手工阀门操纵杆位置开关Ｃ３感知或停车／空档位置开关感知电路
17.
The locking structure includes projections projecting into the slots that engage holes through the longitudinal ends.
锁紧装置包括卡楯伸进凹槽、过纵向末端的小孔。
18.
Approach and Apparatus of Perpendicular Move Friction Test to Small Submersible Implement;
小型潜器纵向运动阻力试验方法和装置研究