1.
Effect of Natural Circulation on RCS Depressurization Strategy in PWR NPP
压水堆核电厂自然循环对一回路卸压策略的影响
2.
When he returned, we unloaded my luggage and began jogging towards my platform.
他回来后,我们把我的行李卸了下来,开始朝着我的站台一路小跑。
3.
Remove turbocharger oil feed line.
拆卸透平增压器输油管路。
4.
Study of the Control Technology for the Overloading Pre-compression and Unloading of Soft Road Base
公路软基超载预压卸载控制技术研究
5.
Test study on rebound deformation of foundation after unloading by vacuum preloading
真空预压卸载后地基回弹变形的试验研究
6.
Heaps of metal and tangled wire litter Chateauroux's concrete surface on which all the dismantling and recycling takes place.
一堆堆废铁和纠缠如麻的线路，零散丢弃在沙特鲁水泥地上，所有拆卸和回收都在这里进行。
7.
To bring(a person exposed to conditions of increased pressure) gradually back to normal atmospheric pressure.
使卸压使（处于增强气压作用下的人）逐渐回到正常的大气压下
8.
Study of the Sound Velocity and the Unloading Path under High Pressure of Transparent Window Materials;
透明窗口材料高压声速及卸载路径研究
9.
STUDY ON THE SETTLEMENT RATE STANDARD FOR DETERMINING THE SURCHARGE REMOVAL TIME FOR EMBANKMENT ON SOFT GROUND
公路软基超载预压卸荷沉降速率标准研究
10.
When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged.
当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
11.
The Effect of Primary Water Chemistry on the Integrity of Nuclear Fuel Cladding Tube;
压水堆一回路水化学对燃料包壳完整性的影响
12.
Casting Technique for Primary Coolant Piping for Pressurized Water Reactor Power Plant and Its Localization
压水堆一回路管道的铸造工艺及其国产化
13.
Optimization of Leakage Calculation in RCP System of PWR
压水堆核电厂一回路冷却剂泄漏率计算的优化
14.
He dumped his box on top of some others and started back to the boots.
他把背上的箱子往堆上一卸，返身再回登陆舰。
15.
The government points out that the clock tower has to be demolished due to road widening, What is your response?
政府指出基于道路扩建,有关钟楼有需要拆卸,对此你有何回应?
16.
Louis will be dethroned and returned to the wild on Saturday.
到12日晚节日结束时，路易也将卸任并重新返回大自然。
17.
Model Establishment and Simulation of Fully Hydraulic Lifting Mechanism on Off-road Dumpers
非公路自卸汽车全液压式举升机构的建模与仿真
18.
Pressure Setting of Press-keeping Clamping Circuit Based on Accumulator
基于蓄能器保压夹紧回路的压力设定