1.
It is rapid and accurate in design and drawing the finger milling-cutter templet with CAD.
本文着重阐述了渐开线齿轮齿根过渡曲线的确定以及使用微机设计齿轮指形铣刀样板的方法。
2.
An Analysis and Settlement to the Interference from Transitional Curve of Involute Gear Drive;
渐开线齿轮传动过渡曲线干涉问题的分析及处理
3.
Accurate Modeling of the Tooth-surface of a Spiral Bevel Gear with Fillet
含过渡曲面的弧齿锥齿轮齿面精确建模
4.
connecting curve
耦合[过渡,连接]曲线
5.
According to the special tooth structure of the Circular-Arc-Tooth-Trace cylindrical gear (CATT gear), an analysing model of its bending strength is established.
本文根据圆弧齿线圆柱齿轮轮齿的独特结构,建立了该齿轮的弯曲强度分析模型;
6.
curve-tooth bevel gear
弧齿伞齿轮,曲线齿锥齿轮
7.
Study on transition between sections of B-Spline curves used in direct interpolation algorithm;
B样条类曲线插补算法的曲线段间过渡问题研究
8.
Shape Optimization of Transition Curve of Shoudle of Step-Shaped Shaft and Its Experimental Research;
阶梯轴轴肩过渡曲线的开头优化及实验研究
9.
Compared with a standard involute gear, the unsymmetric involute gear could efficiently improve the tooth root bending strength by finite element analysis.
对实例的有限元分析表明非对称渐开线齿轮的齿根弯曲强度比对称齿轮有较大提高。
10.
Research on the tooth root stress of the involute arc cylindrical gear
渐开线弧齿圆柱齿轮的齿根应力分析
11.
The Research of Linear Guide s Static Stiffness and the Design of Transition Curve;
滚动直线导轨副静刚度的研究及过渡曲线的设计
12.
Using SolidWorks Establish Three Dimensional Solid of Worm Enveloped by Conical Surface Precisely
锥面包络蜗杆的接触线和过渡曲线及实体的实现
13.
Study on the Influence of Wicket Opening and Closure Law and Characteristics of Turbine on the Transient Process of Hydropower Station;
导叶启闭规律及水轮机特性曲线对水电站过渡过程的影响研究
14.
Study on the Bending Strength of Case-hardened Double-circular-arc Gear;
硬齿面双圆弧齿轮齿根的弯曲强度研究
15.
The yield point represents the dividing line or transition from the elastic to the plastic region of the curve.
屈服点是弹性变形区域到塑性变形区域之间曲线的过渡点。
16.
B-spline curves based on non-circular gear pitch curve design
基于B-spline曲线的非圆齿轮节曲线设计
17.
Final gear ratio (Hypoid final gear)
主减速齿轮比(双曲线主减速齿轮)
18.
Choices of inner gear profile curve of rolling gear drive;
波式滚动活齿传动内齿轮齿廓曲线的选择