1.
Large eddy simulation of interior flow field in front guide impeller of axial flow pump
轴流泵前置导轮内部流场的大涡模拟
2.
Numercal Studies on Centrifugal Pump Installed Compound Impeller with Inducer;
带前置诱导轮的复合叶轮型离心泵数值研究
3.
Place the front wheels in the straight-ahead position.
置前轮于正前方位置。
4.
reel fore-and-aft adjuster
拨禾轮前后位置调节器
5.
This car has front-wheel drive.
这辆车有前轮驱动装置。
6.
Position front bumper reinforcement on vehicle.
将前保险杆加强组件置于车轮。
7.
either of two rods that link the steering gear to the front wheels.
连接操纵装置和前轮的两根杆子之一。
8.
Check front wheel and tire assembly for radial runout.
检查前车轮及车胎组件之径向偏置。
9.
Sprocket holes: Feed holes in paper tape.
刺轮孔:纸带上，引导纸带向前的小孔。
10.
a block used to guide a rope forming part of a ship's rigging to avoid chafing.
引导绳索成为船的传动装置避免摩擦的滑轮。
11.
Assemble die adopt tungsten steel die, guide wheel have defend jump wire device.
9过线模采用钨钢模，过导轮处设有防跳线装置。
12.
Front-mounted power take-off for agricultural wheeled tractors
GB/T10917-1989农用轮式拖拉机前置动力输出轴
13.
a steering bearing that enables the front axle of a horse-drawn wagon to rotate.
能让马拉四轮马车的前车轴转动的操控装置。
14.
a wheel located under the nose of an airplane that is part of the plan's landing gear.
装在飞机的前端作为起落装置的一部分的轮子。
15.
Aircraft battery installed strengths front car start-up optimal design
飞机电瓶起动车前轮收放装置优化设计
16.
No default profile set. Please use the Profile Wizard to set a default profile before running the Message File Conversion Wizard.
未设置默认配置文件。请在运行邮件文件转换向导之前，使用配置文件向导设置默认配置文件。
17.
tape guiding roller
磁带导向滚轮，导带轮
18.
Maximize the stitch length, and turn the handwheel until walking foot 1 reaches its front end position. Now, loosen screw 2 in the center shaft bell crank.
把缝迹调到最大，转动飞轮，在外压脚1前进到最前的位置拧松中轴轮紧固螺丝2。