说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 微层板
1.
Research on Mechanical Properties and Toughing Mechanism of Ti/Ti-Al Micro Laminate Sheet Prepared by EB-PVD Technology
EB-PVD工艺制备Ti/Ti-Al微层板的力学性能与增韧机制研究
2.
Study on damage failure pattern and microstructure analysis of target plate of laminated armor Al alloy
铝合金多层板靶板损伤形式及其微观组织分析
3.
MICROWAVE ABSORBING PROPERTIES OF SINGLE-LAYER AND DOUBLE-LAYER CEMENTITIOUS PLATES
单/双层水泥基平板的微波吸收性能
4.
However, relatively few of the secondfloor ceiling joists themselves were damaged.
但是第二层楼天花板托梁却被破坏得较轻微。
5.
Study on the Processing Technology of the Step Designed Planar Buried Resistant Microwave Multilayer Printed Circuit Board
埋电阻台阶式多层微波印制板制造技术研究
6.
Experimental Research on Micro Jet Flow, Flat Plate Boundary Layer Flow and Turbine Cascades Flow;
微尺度射流、平板边界层及叶栅流动实验研究
7.
Study on Microstructure and Properties of Ni/Ni_3Al Microlaminate Sheets Deposited by EB-PVD;
EB-PVD制Ni/Ni_3Al微叠层板的组织结构及性能研究
8.
Influence of Microarc Oxidation Ceramic Coating on AZ31 Alloy Sheet in the Incremental Forming
微弧氧化陶瓷层对AZ31合金板料渐进成形的影响
9.
Preparation of Pd Nanoparticles Used Lamellar Liquid Crystal as a Template under Microwave Irradiation
微波辅助加热层状液晶模板法制备钯纳米粒子
10.
Study on Acoustic Characteristic of Double Layer Micro-perforated Panel Absorber at High Temperature
高温下双层串联微穿孔板结构声学特性研究
11.
Moisture Monitoring of Transformer Pressboard Drying Process
变压器绝缘层压板干燥过程微水分检测
12.
Strip roughness must not exceed 40 microinch (1.0 micron) in order to achieve these minimum coat weights.
板面粗糙度不能超过40微寸(1.0微米),以达到最低镀层重量。
13.
Preparation of Composite Microspheres with Multi-layer Core-shell Structures by Microgel Template Method;
微凝胶模板法制备多层核—壳结构复合微球材料研究
14.
Micro-resistance test method of plating thickness of platedthrough holes for printed boards
GB/T4677.2-1984印制板金属化孔镀层厚度测试方法微电阻法
15.
THE ELEMENTAL DEPTH-DISTRIBUTION OF SECONDARY ELECTRON EMITTING LAYER IN MCP
微通道板次级电子发射层中各元素随深度的分布
16.
Preparation and Characterization of Electroless Coatings on Carbon Nanofibers and Nano or Micro Structures by Using Template Method;
纳米碳纤维表面化学镀层及模板法纳微结构的制备与表征
17.
The Computation and Analysis of Heat Transfer of Platelet Cooled Microchannel on the High Temperature and High Pressure Gas Wall;
高温高压燃气壁面层板微小冷却通道的传热计算与分析
18.
Experiment Research and Numerical Simulation of the Laminar Flow in the Microchannels between the Two Parallel Planes;
两平行平板间微通道层流流动的实验研究和数值模拟