1.
Create a Rotation Key on Z
创建Z轴的旋转关键帧
2.
Create a Position Key on Z
创建Z轴位置关键帧
3.
Delete a Rotation Key on Z
在Z轴删除旋转关键帧
4.
Delete a Position Key on Z
在Z轴删除位置关键帧
5.
Delete a Scale Key on Z
在Z轴删除放缩关键帧
6.
Use Any Object's Z Axis
使用任意物体的Z轴
7.
Development of Z Axis and Its Driving System for a Nano-CMM;
纳米三坐标测量机Z轴的研制及Z轴驱动系统的研究
8.
Create Explicit Key Rotation Z
创建Z轴的旋转直接关键帧
9.
Create Explicit Key Position Z
创建Z轴的位置直接关键帧
10.
Vibration and shock--Mechanical transmissibility of the human body in the z direction
GB/T16441-1996振动与冲击人体Z轴向的机械传递率
11.
"Bonus Z" in the Selective Laser Sintering of Polymeric Materials
高分子材料选择性激光烧结中的Z轴“盈余”
12.
X, Y, Z Axis guides at recirculating rollers on hardened and ground guides, inserted with screws.
X、Y以及Z轴导轨经由淬火处理打磨而成,内置有螺纹。
13.
The Z axis is provided with zero output to facilitate the setting and changing of electrical charging depth if installed with optical ruler.
若加装光学尺Z轴具有零点输出功能放电深度的设定及变更容易。
14.
Development of Nano Coordinate Measuring Machine Main Body and Research on Driving System of Z-Axis;
纳米三坐标测量机主体机台研制及Z轴驱动系统研究
15.
Influence of Effective Dose on Patients for Different Z Value During Computed Tomography
计算机断层扫描Z轴扫描位置的选取对患者所受有效剂量的影响
16.
It appears as a small gnomon with lines extending in each major direction (along the X, Y, and Zaxis).
它看起来象是一个小的指时针和在每个主要的轴向上(x,y,Z轴)的线的延伸。
17.
Since we can't specify Lx and Ly, the vector L can lie anywhere on the surface of a cone whose axis is the Z axis.
由于不能确定Lx和Ly,矢量L可以处于以Z轴为轴的圆锥体面上任意处。
18.
Determines how much the X, Y and Z position is increased( or decreased) for each instance.
决定每一复制实例层之间递增的或者递减的在X,Y和Z轴上的偏移量。