1.
Study on factors to influence torque strength of anaerobic thread-locking adhesives for automobiles
汽车用厌氧螺纹锁固胶扭矩的影响因素研究
2.
Mechanical properties of fasteners--Thread forming screws--Metric coarse thread series
GB/T3098.7-1986紧固件机械性能自攻锁紧螺钉粗牙普通螺纹系列
3.
reverse anchor jam nut
反向锁闭机构紧固螺帽
4.
Screw thread shanks for thread forming screw--Metric coarse thread series
GB/T6559-1986自攻锁紧螺钉的螺杆粗牙普通螺纹系列
5.
Mechanical drawings--Representation of screw threads and threaded parts
GB/T4459.1-1995机械制图螺纹及螺纹紧固件表示法
6.
General rules of tightening for threaded fasteners
GB/T16823.2-1997螺纹紧固件紧固通则
7.
"Drill & tap for M16X2-1.38 Deep NPT,16 places for cover plate mounting screw"
钻孔,攻出一只M16X2-1.38深NPT螺纹,16处,该螺纹应与盖板固定螺丝配套
8.
Sturdy full-length threaded corrosion-resistant bolts provide the required high packing stress.
坚固的全螺纹防腐螺栓提供所需要的保压应力。
9.
Remove Forcing Screw 6960-4, Step Plate 8140–2, and Threaded Adapter 8140-
拆下加固螺丝6960-4、踏板8140–2和螺纹接头8140-1。
10.
Method of tightening test for threaded fasteners
GB/T16823.3-1997螺纹紧固件拧紧试验方法
11.
Fasteners--Ends of parts with external thread
GB/T2-1985紧固件外螺纹零件的末端
12.
Electroplated coatings on threaded fasteners
GB/T5267-1985螺纹紧固件电镀层
13.
Tolerances for fasteners--Components for bolted connections made mainly from materials with a high temperature strength
GB/T3103.4-1992紧固件公差耐热用螺纹连接副
14.
The steering column stalks that are supplied as spare have no thread on securing plate.
备用方向盘轴柄在固定板上没有螺纹。
15.
The Research of Technology to Prevent from Looseness and Method of Testing for Thread Fastener;
螺纹紧固件防松技术和试验方法研究
16.
Torque Test of Thread Fastener for Automotive Braking Pipe Line
汽车制动管路螺纹紧固件的扭矩试验
17.
Side view of hexagonal jam nut. Selection box height represents thread diameter.
六角锁紧螺母的侧面图。选择框高度代表螺纹直径。
18.
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。