1.
Causes and countermeasures on the over temperature of the bearing bush of hydrogen compressor in cyclohexanol plant
环己醇装置氢气压缩机轴瓦温度超高原因分析及对策
2.
Moreover, the bush temperature control is a tather important question in the temperature field control.
而在温度场控制中,轴瓦温度的控制又是一个需要先解决的重要的课题。
3.
Usually, tungsten bush is used to be the thrust bearing in water power plant, but it is easy burned down since its high temperature during its operation.
水电厂的推力轴瓦，已往多采用钨金瓦，它在运行中温度偏高，容易发生烧瓦事故。
4.
The Influence of Re-sintering Temperature and the Blooming Density on CuPb24Sn Bearing Material Porosity and Metallic Phase
复烧温度与初轧密度对CuPb24Sn轴瓦材料孔隙率及金相的影响
5.
The energy equations of the oil film and the bush are solved simultaneously by using an efficient finite difference scheme.
用一有效的有限差分法同时求解油膜和轴瓦的温度控制方程。
6.
Calculation of Dynamic Stress and Fatigue Strength of Crankshaft with Bush Deformation Included
计入轴瓦变形的曲轴动应力和疲劳强度计算
7.
Mooney and Ewart viscometer
穆尼-爱瓦特同轴圆筒旋转粘度计
8.
uniaxial stress and temperature cycling test
单轴应力-温度循环试验
9.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
10.
Based on tests and practice,the optimum“three temperature”for adhesion quality between plain bearing and babbitt metal in the process of pouring babbitt metal on bearing is put forth.
在试验和实践的基础上，提出轴瓦浇铸过程中轴瓦与白合金粘着质量的最佳“三温”
11.
Automatic measurement system on the axis wall height and opposite side parallelism
轴瓦半径高度及对边平行度自动检测系统
12.
"Maximum thermal dissipation of the slot in Milliwatts.
"以毫瓦表示的插槽的最大温度散发。
13.
boring machine for connecting rod and cylinder block bush
连杆瓦及缸体轴瓦镗床
14.
Experimental Study of Scale Effect on Gas-saturated Coal Samples subjected to Uniaxial Compression
含瓦斯煤单轴压缩的尺度效应实验研究
15.
Multipoint measurement system for the thickness of bearings based on laser micro-displacement
基于激光微位移的轴瓦厚度多点检测系统
16.
Design and Fabrication of a Temperature-Monitoring System of a Dewar in a Cryogenically Cooled Receiver
制冷接收机低温杜瓦温度监测系统的研制
17.
Remove the lower insert from the bearing cap.
从轴承盖上拆去下轴瓦。
18.
Install the lower bearing inserts into the main bearing caps.
安装下轴瓦到主轴承盖。