1.
vacuum powder insulated cryogenic tank
真空粉末绝热低温贮液槽
2.
Discussion on sealing vacuum of cryogenic liquid storage vessel with evacuated powder insulation
真空粉末绝热低温液体贮槽封结真空度探讨
3.
The substitution of evacuated powders for high vacuum alone will usually improve the insulation by reducing the radiant heat transfer.
只需用抽空气体的粉末而不用单纯的高真空，一般便可减少辐射热传输，从而提高绝缘度。
4.
high vacuum superinsulation cryogenic container
高真空超绝热低温容器
5.
Study on wave vacuum drying process of soya phospholipids
大豆粉末磷脂微波真空干燥工艺研究
6.
The substitution of evacuvated powders for high vaccum alone will usually improve the insulation by reducing the radiant heat transfer.
只需用抽空气体的粉末而不用单纯的高真空，一般便可减少辐射热传输。
7.
Analysis on thermal bridge effects of vacuum insulation panel
真空绝热板(VIP)热桥效应分析
8.
Loss of Vacuum Experiment on a Multi-Layer Insulation Vessel;
高真空多层绝热低温容器真空丧失试验研究
9.
Preparation and vacuum heat treatment of high purity Ti_3SiC_2 powder
高纯度Ti_3SiC_2粉体的制备及真空热处理
10.
Building-up of an Cryoganic Vacuoua Adiabatic Calorimeter ant Muasurerrunts for. the Specifie Hsat of the Standard Sampit-Potassium Chloride at teh Low Temperaturer.
低温真空绝热量热计的建立及标准样品氯化钾低温比热的测定
11.
Study on the daily evaporation rate of high-vacuum multilayer insulated dewar
小型高真空多层绝热杜瓦日蒸发率性能研究
12.
EXPERIMENTAL INVESTIGATION ON THE LEAK AND DEGASSING RATE OF HIGH VACUUM MULTI-LAYER INSULATED DEWAR
高真空多层绝热杜瓦漏放气速率试验研究
13.
Research on Vacuum Multilayer Insulation of LHe Transfer Pipe for NBI System;
中性束注入系统液氦输送管真空多层绝热研究
14.
Theoretical analysis and numerical calculation on the stress on vacuum insulation glass
真空绝热玻璃应力理论分析及数值计算
15.
a white toxic powder obtained by heating barium oxide in air.
一种白色的有毒粉末，通过加热空气中的氧化钡而得到。
16.
Heating of air, suited to drying up certain powder, chemical engineering process and jet drying under certain pressure.
空气的加热，适用于一定压力下，一些粉末干燥、工过程及喷射干燥。
17.
Integral Vacuum Sintering Furnace Manufactuved by Xiangtan Xinda P/M Equipment Manufacturing Company Ltd
湘潭新大粉末冶金设备制造有限公司的一体化真空烧结炉
18.
Microstructures and Properties of Hard Materials Coating on Die Steel Surface by Vacuum Powder Sintering;
真空粉末烧结法在模具钢表面制备的硬质覆层的组织和性能