1.
accessory drive pad
附件传动装置安装座
2.
Install the seatback in the vehicle.
在车辆里安装座椅背。
3.
Install the seat/shoulder belt anchor bolt.
安装座椅/安全肩带系紧螺栓。
4.
Install seat cushion outboard trim cover.
安装座位衬垫外侧饰板盖。
5.
seat with integral seat belt anchorages
设有原装安全带固定装置的座位
6.
Install screws attaching seat function switch to seat trim panel.
安装连接座椅功能开关至座椅饰板的螺钉。
7.
The lathe should be set on a firm base.
车床应安装在坚实的底座上。
8.
flexible-mounted engine
安装在弹性座垫上的发动机
9.
Is Base Elbow Installed Level?
基座弯头是否安装在水平位置
10.
Install bulbs and sockets in the lamp housing.
安装灯泡和插座于灯外壳上。
11.
Install pitman shaft and side cover in the housing.
在机座中安装转向摇臂轴和侧盖。
12.
Roll the seatback cover downward and engage the hook and loop fastener.
向下旋转座椅背盖，安装钩环固定器。
13.
The machine rests on a bed of concrete.
机器安装在混凝土基座上.
14.
The frame or chassis on which panels of electrical equipment may be mounted.
可安装电气设备板的框架或底座。
15.
Road vehicles--Semi trailer fifth wheel mounting
GB/T13880-1992半挂牵引车牵引座的安装
16.
"Controllers may be supplied with painted steel floor mounting legs. For base mounting or stainless steel mounting legs, consult the Factory."
可提供配置涂漆钢地面安装支架的控制装置。如果需要底座安装或不锈钢安装支架,请工厂联系。
17.
Reinstall the elbow into the base of the relief valve to hold the Air Gap Drain in place.
将弯头安装在安全阀的底座，将气隙排放装置固定住。
18.
Install the main unit to the in-dash location, and the connection box under the navigator's seat, etc.
把主机安装到仪表板上。并把连接盒安装到副驾驶座的下面。