1.
Analysis and Research on Fixed Torque Bolt Joint Function Based on RE;
基于反求工程的定扭矩螺栓联接功能分析与研究
2.
Comparison Between Torque Method and Angle Method in Bolt Assembly Technology
螺栓装配技术中扭矩法与转角法比较研究
3.
1~10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
GB/T3098.13-1996紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径
4.
Replace body bolts and torque evenly to70 ft./ lbs.
重新放置阀体螺栓，并且用70英尺/的扭矩均匀的旋紧。
5.
Replace body bolts and torque evenly to 70 ft./lbs.
重新放置阀体螺栓，并且用70英尺/磅的扭矩均匀的旋紧。
6.
Regression Analysis of Relationship Between Axial Force and Torque of High-strength Bolt Connecting Steel Structure for Boiler Based on Experiment Data
基于试验数据的锅炉钢结构高强度螺栓轴力与扭矩关系回归分析
7.
Recommended flywheel bolt torques are:
飞轮螺栓的推荐扭力为：
8.
all-metal prevailing torque type nuts
金属预置扭矩式螺帽
9.
a hand tool that is used to hold or twist a nut or bolt.
用来上紧或扭螺母或螺栓的手工具。
10.
After proper operation has been verified, tighten all bolts using the crossover method. Recommended tightening torques pattern is listed below.
在检验操作能够正常进行后，在采用交叉法紧固所有螺栓。推荐的紧固扭矩模式如下所示。
11.
Mounting Bolts (Screws)—IAC Motor
固定螺栓（螺丝）—IAC马达。
12.
Qualitatively, a torque is a "twist".
定性地说，转矩就是扭转。
13.
Torque Test of Thread Fastener for Automotive Braking Pipe Line
汽车制动管路螺纹紧固件的扭矩试验
14.
Inspect crankshaft, flexplate/flywheel and bolts for damagTighten to correct torque
检查曲轴、活动板/飞轮和螺栓是否松动。拧紧螺栓以校正扭力。
15.
Reliability Analysis of Tightening Bolts with Moment Method and Rotation Angle Method
力矩法、转角法上紧螺栓力矩可靠性分析
16.
square collar-head set-bolt
方头凸缘端紧定螺栓
17.
Rear Mount To Body Bolts
后固定座与车身螺栓
18.
LEFT ENGINE MOUNT BRACKET LOWER BOLTS
左引擎固定支架下螺栓