1.
A step-down transformer has a turns ratio less than 1.
降压变压器的匝数比小于1。
2.
The influence of CT turn ratio to high impedance differential protection is analyzed, and the method of measuring turn ratio error is also introduced.
分析了CT匝数比误差对高阻抗差动保护的影响,并介绍了匝数比误差的测量方法。
3.
Turn ratio of magnetic valve type controlled reactor based on bifurcation theory
基于分岔理论的磁阀式可控电抗器匝数比研究
4.
Only transformer coupling can contribute to the voltage gain of an amplifier by virtue of a stepup turns ratio.
只有放大器耦合方能通过开压匝数比提高变压器电压增益。
5.
And the magnetic intensity is directly proportional to input ampere turns.
磁感应强度与输入电流安匝数成正比 ;
6.
turns correction compensation
匝数更正（补偿）值
7.
An electric transformer changes the alternating voltage applied to it in proportion to the numbers of turns in its primary and secondary windings.
变压器其交变电压的改变与初级线圈及其次级线圈的匝数成正比。
8.
Therefore, the magnetomotive force in the air gap is essentially proportional to the primary ampereturns squared.
所以，气隙中的磁动势实际上与初级安匝数的平方成正比。
9.
Impedance will reflect back as the square of the turns ratio.
阻抗将会按照匝比的平方反射回来。
10.
At the same time, we have theoretically given out the foldnumbers of local oscillation coil.
理论上也探讨了本振线圈的匝数值。
11.
The calculation model of vehicle travelling risk on freeway ramp
高速公路匝道行车风险系数计算模型
12.
Drag onto the page. Right-click to make proportional or show two windings.
拖到绘图页上。右击可成为成比例的或显示两匝。
13.
Connection Comparison of Two Turns in On-Load-Tap-Changing Auto-Transformer
有载自耦调压变压器两种线匝连接方式的比较
14.
Parameter programmable: slot number, circle number, rotation degree、hooking degrees and locomotion can all be programmed.
参数可编程：槽数、匝数、转角度数、挂钩度数、转向等可编程。
15.
a unit of magnetomotive force equal to 0.7958 ampere-turns.
测量磁通势的单位等于（待查表）安培匝数。
16.
Estimation method of the working-coils ampere-turn in the synthetical degaussing process
综合消磁过程中工作线圈安匝数的估算方法
17.
Computing Method for Main and Auxiliary Focus Coil Ampere Winding of Electron Gun
电子枪主辅聚焦线圈安匝数的计算方法
18.
Study on Parameters and the Suitable Location of Branched Tunnel;
匝道隧道设计参数及进出口合理位置研究