1.
Swirl Burner Experimental Study of 330MW Boiler under Cold Conditions;
330MW锅炉旋流燃烧器冷态模化实验研究
2.
Cold Model Experiment and Simulation of Autothermal Reforming Reactor
气态烃自热转化炉冷态实验研究与数值模拟
3.
Model Studies on Multitube Blow Tank Fly Ash Conveyor in Cold State
多管流化罐返料器的冷态模型实验研究
4.
Research on Waste Incineration Ash Deposition Characteristics in Fluidized Beds and Cold Simulated Experiment of Ash Deposition;
流化床垃圾焚烧积灰特性研究及冷态积灰模拟实验
5.
Cold Model Experiments and Numerical Simulation of the Second Air Injection Characteristic on a CFB Boiler;
循环流化床锅炉二次风射流特性的冷态实验研究与数值模拟
6.
Experimental Study and Static Simulating Modal of Single-effect LiBr Absorption Refrigerator Using Plastic Pipe;
塑料管单效溴化锂吸收式制冷机实验研究及静态仿真模型
7.
Experiments and Numerical Simulation on the Resistance Characteristics of the Air Distributor in the Circulating Fluidized Bed Boiler;
循环流化床布风板的冷态模化试验及数值模拟
8.
Dynamic Simulation and Experimental Verification of The Oxford Stirling Cryocooler
牛津型斯特林制冷机动态模拟及实验验证
9.
Frozen Process Experiment & Digital Simulation of Carbon Dioxide Cryo-probe;
二氧化碳冷冻刀冻融实验及数值模拟
10.
Experimental Study on Diameter-Changing Riser of CFB
循环流化床变径提升管冷模实验研究
11.
The Cold Experimental Study of Fluidized Iron Reduction Process
流态化炼铁工艺冷态实验的设计与研究
12.
Investigation and Simulation of Air-source Heat Pump During Reverse Cycle Defrost
风冷热泵除霜过程动态特性模拟和实验研究
13.
Study on the Deposition Technology and the Simulated Experiment in Spouted-bed at Room-temperature;
热解碳沉积工艺及冷态喷动模拟实验研究
14.
Research on Stripping in Cold Flow Packing Stripper of FCC Unit;
催化裂化填料汽提器汽提性能冷态实验研究
15.
Auto-control of Technical Parameters on Fluidized-bed in Room-temperature Simulation Experiment;
喷动流化床冷态模拟试验工艺参数的自动控制
16.
Cold-state Modeling of Modified HT-NR3 Swirl Burners
改进型HT-NR3旋流燃烧器冷态模化试验研究
17.
Theoretical and Experimental Study on Technology of Fluidization Adsorption Refrigeration;
流态化吸附制冷技术的理论及实验研究
18.
Theoretical and Experimental Study on Fluidization Adsorption Refrigeration System;
流态化吸附制冷系统的理论与实验研究