1.
The Research on the Control System of Electro-hydraulic Servo Fatigue Loading Machine
电液伺服疲劳加载试验台控制系统研究
2.
The Approach to Draw up the Fatigue and Fracture Accelerative Test Load Spectrums and Related Experimental Study
疲劳／断裂加速试验载荷谱的编制及其实验研究
3.
Research on Fatigue Damage of Asphalt Mixture under Different Loading Frequencies
不同加载频率下沥青混合料疲劳损伤特性研究
4.
Influence of Ⅲ-mode Loading on the Growth Velocity ofⅠ-mode Fatigue Crack
Ⅲ型加载对Ⅰ型疲劳裂纹扩展速率的影响
5.
Study on Multiaxial Cyclic Stress of Varying Amplitude Fatigue Crack Growth Rate
多轴变幅加载下疲劳裂纹扩展速度的研究
6.
Study on Growth of Fatigue Crack of PD3 Rail Steel under Different Load Rate Condition
不同加载速率下PD3钢轨疲劳裂纹扩展行为研究
7.
Investigation on Fatigue Notch Factor for Medium Carbon Steel under Axial Loading
轴向加载条件下中碳钢疲劳缺口系数的研究
8.
General Description of Multiaxial Low Cycle Fatigue under Nonproportional Loading
多轴低周非比例加载下疲劳寿命预测方法综述
9.
Investigation on Extra-Low Cycle Fatigue Fracture Design for Middle Carbon Steel under Axial Loading;
轴向加载条件下中碳钢的超低周疲劳断裂设计研究
10.
A Research on the Fatigue Damage of AsPhalt Overly on Old Cement Pavement under Traffie Load;
交通荷载下旧水泥混凝土路面沥青加铺层结构的疲劳性能研究
11.
FATIGUE LIFE PREDICTION FOR NOTCHED SPECIMENS UNDER MULTIAXIAL NON-PROPORTIONAL LOADING AT HIGH TEMPERATURE
高温多轴非比例加载下缺口试样的疲劳寿命预测
12.
Experimental Research on Fatigue Behavior of Reinforced Concrete Beams Strengthened with HPFL under Overloading Condition
超载情况下HPFL加固钢筋混凝土梁疲劳性能试验研究
13.
Fatigue Life Prediction Based on Dynamic Response Characteristics for Spot-welded Joints under Variable Amplitude Loading
变幅加载下基于动态响应特性的点焊接头疲劳寿命预测
14.
Creep-fatigue Life Prediction Methods of Pressure Vessel Typical Steels under Complicated Loading Conditions
复杂加载条件下压力容器典型用钢疲劳蠕变寿命预测方法
15.
SHORT CRACKS GROWTH AND FATIGUE DAMAGE UNDER TWO STEP LOADING
两级载荷作用下疲劳短裂纹扩展与疲劳损伤
16.
The Behaviors of γ-TiAl Alloy under Thermal Fatigue and Dead-load Thermo-mechanical Fatigue;
γ-TiAl合金的热疲劳与静载热机械疲劳行为
17.
Evaluation of Uncertain Degree for Radial Force Display Error of Radial Load Fatigue Test Machine for Vehicle Wheels
车轮径向载荷疲劳试验机径向加载力示值误差的测量不确定度评定
18.
Influence of Training with Secondary Load on Bending Fatigue Strength of Cranksh aft
次载锻炼对曲轴弯曲疲劳强度的影响