1.
Valves ordered for compliance with API607 will be provided with graphite packing.
符合API607的阀门将配置石墨填料。
2.
PTFE Lining Graphite Packing Column Assembly Technology Resolution
PTFE内衬石墨填料塔安装技术解析
3.
Packing: PTFE or graphite packing protected from freezing by a column of insulating gas.
填料：通过绝缘气体柱防止PTFE或石墨填料冻结凝固。
4.
The results showed that the best filler is graphite.
结果表明，10%石墨填料对兼顾体系的阻尼性能和模量效果最佳。
5.
Flexible Graphite Packing & Gaskets - Optional on all NIBCO iron valves when specified.
柔性石墨填料和密封垫-如果指定的话,所有尼伯科铸铁阀门都可以选择这种材料。
6.
Standard NIBCO iron valves are furnished with Synthetic Fibres and Graphite packing along with Synthetic Fibre gaskets.
标准尼伯科铸铁阀门与合成纤维密封垫一起配备合成纤维和石墨填料。
7.
Structures and Properties of Expandable Graphite Filled Polypropylene;
可膨胀石墨填充聚丙烯复合材料的结构与性能
8.
Research on Graphite-filled Carbon/phenolic Composite for Guide of Launch Canister
发射箱导轨用石墨填充碳/酚醛复合材料研究
9.
Properties of PTFE composites filled with nano-Si_3N_4 and graphite
纳米Si_3N_4与石墨混合填充PTFE复合材料的性能
10.
Friction and Wear Performance of PTFE Composites Filled with Nano-SiC and graphite
纳米SiC与石墨填充PTFE复合材料的摩擦磨损性能
11.
Correlation Between Thermal Properties and Rheological Behavior of Graphite Filled Polypropylene
石墨填充聚丙烯导热复合材料的流变行为
12.
alloy Iron Valve are furnished with TFE Braided packing and Reinforced Graphite gaskets.
合金铸铁阀门配置TFE纤维填料和强化石墨密封垫。
13.
Packing: Teflon or graphite packing protected from low temperatures by a column of insulating gas.
填料：通过保温绝缘气体来保护聚四氟乙烯或石墨免受低温影响。
14.
Single set packing: three or four graphite rings between braided rings, 80-90 lbs./cu. ft. density.
单填料：在编织环之间放置三个或四个石墨环，密度80-90磅/立方英尺。
15.
Friction and Wear Properties of PTFE Composites Filled with Nano-SiC,Nano-SiC/Graphite and Nano-SiC/MoS_2
纳米SiC及其与石墨、二硫化钼填充PTFE基复合材料摩擦磨损性能研究
16.
Class 150: Corrugated graphite-filled steel gasket.
150磅级：石墨填充波纹钢板密封垫。
17.
graphite fiber reinforced composite
石墨纤维增强复合材料
18.
Experimental Researches on Engineering Behaviors of Rockfill Materials in Rock-filled Highway Roadbed;
高速公路填石路基填石料工程特性试验研究