1.
"Several timing methods are in used, for example, using a stroboscopic light or a piston-position gauge."
可使用的正时方法有几种,例如可使用频闪灯或活塞位置仪。
2.
Effect of Cooling Oil-antrum Position on Intensity of Diesel Engine Piston
活塞冷却油腔位置对活塞强度的影响
3.
The Impact of Position of cooling gallery on Temperature Field of Diesel Engine
振荡油腔位置对柴油机活塞温度场的影响
4.
piston displacement prover
活塞置换式检定装置
5.
The trailing edge of the fourth notch, which causes the pulse, is four degrees before top dead center (TDC) of the corresponding piston.
产生的脉冲的第四凹槽的后缘，位于相应的活塞在前上死点（TDC）4度的位置的位置上。
6.
marine piston type condensing unit
船用活塞式冷凝装置
7.
piston connecting rod arrangement misalignment
活塞-连杆布置失中
8.
Drain Plug/Backup Light Switch Location
放油塞/倒车灯开关位置
9.
Fill/Drain Plug And Tag Locations
注油塞/放油塞和标记位置
10.
slave cylinder piston return spring
工作缸活塞回位弹簧
11.
Ignition timing devices. The contact points must be timed to close and open in proper relation to the piston positions in the cylinders.
点火正时装置:触点必须能够在活塞处于气缸中相关位置时,按时关闭和开启。
12.
It is defined as the volume of the combustion chamber with the piston farthest out divided by the volume with the piston in the full-compression position (see piston and cylinder).
它的定义是汽缸的最大工作容积(活塞离缸盖最远时)与活塞在充分压缩位置时的汽缸工作容积之比
13.
free piston gas turbine plant
自由活塞式燃气轮机装置
14.
opposed ram steering gear
对置活塞式电动液压舵机
15.
To hold(shot or powder)in place with a wad.
用炮塞将（枪弹或火药）放入位置
16.
TRANSMISSION SWITCH AND PLUG LOCATIONS
变速箱开关与注油塞位置
17.
Analysis on the Call Blocking Probability Considering Location Update Failure
考虑位置更新失败的呼叫阻塞率分析
18.
multiple station combined machine for piston machining
活塞加工多工位组合机床