1.
The process of drawing can import many useful propertues to a synthetic fiber.
拉伸处理能给合成纤维增添许多有用的性能。
2.
Effect of Shot Peening on Tensile Properties of TiAl Alloys
喷丸处理对TiAl合金拉伸性能的影响
3.
Research on the Surface Intensifying Treatment of Drawing Mould with Material QT600-3
QT600-3材料的拉伸模表面强化处理研究
4.
Effect of heat treatment on tensile deformation behavior of SiCp/Al composites
热处理对SiCp/Al复合材料拉伸变形行为的影响
5.
Processing of Chest X-ray Digital Radiography Images Based on Auto Adaptive Nonlinear Stretching
基于自适应非线性拉伸的DR胸片图像处理
6.
Effect of Heat Treatment on Tensile Properties and Microstructure of Ti_3Al/TC11 Dual Alloy Disc
热处理对Ti_3Al/TC11双合金盘拉伸性能与组织的影响
7.
Trouble Analysis and Treatment of Control System of 13000 kN Double Action Drawing Press
13000kN拉伸压力机控制系统故障分析与处理
8.
Effect of Heat Treatment on Transformation Behavior and Tensile Properties of Ti-50.8Ni Alloy
热处理对Ti-50.8Ni合金相变行为和拉伸性能的影响
9.
Effect of Heat Treatment Process on Microstructure and Tensile Properties of Ti-1300 Alloy
热处理工艺对Ti-1300合金的组织和拉伸性能的影响
10.
By proper heat treatment ,it is possible to obtain certain chracteristics in metal such as hardness,tensile strength(ability to resist stretching),and ductility.
通过适当热处理，使金属得到某种特性，如硬度、抗拉强度（抗拉伸能力）和延性。
11.
By way of suitable heat treatment, the tensile fracture morphology changes from brittle intercrystalline fracture to dimple fracture, so the strength and ductility of the alloy is increased.
采用适当的热处理工艺可使合金强韧化 ,拉伸断口由脆性的沿晶断裂变为韧窝状断裂。
12.
Effects of Surface Treatments on Tensile Bond Strength between Dentin and Glass-Infiltrated Ceramics;
不同表面处理方法对渗透陶瓷与牙本质粘接界面的抗拉伸强度的影响
13.
Effects of oxygen plasma treatment on tensile deformation of nano-SiO_2 sol-gel coating ultra-high molecular weight polyethylene filaments
氧等离子体处理对纳米二氧化硅溶胶涂覆高强、高模聚乙烯纤维拉伸性能的影响
14.
Effects of helium plasma treatment on tensile behaviour of nano-SiO_2 sol-gel coating T300 carbon fiber
氦等离子体处理对纳米二氧化硅溶胶涂覆T300碳纤维拉伸性能的影响
15.
The microstructure and tensile deformation of the nano-composite filaments treated by plasma
基于等离子体处理的纳米复合长丝的微观结构和拉伸变形性能(英文)
16.
Effect of a Laser Discrete Pre-quenched Substrate on the Fracture Behavior of Chromium Coating/45 Steel Substrate under Tensile Load
拉伸载荷作用下基体表层激光离散预处理对铬镀层/45钢基开裂行为的影响
17.
The axial drawing ratio and hoop extension ratio should be properly matched.
轴向拉伸比和环向扩张比要合理匹配。
18.
Note that it is stretched/squashed to fit the rectangle.
注意纹理会被拉伸和缩短以适合矩形。