1.
The Study of Bogie Frame Brace Welding Process and Fatigue Life;
转向架交叉支撑装置焊装工艺与疲劳寿命研究
2.
Introduction and Development of Frame-Braced Device Adopted on K2 Bogie;
转K2型转向架交叉支撑装置引进与研制
3.
Research on Bogie Frame Brace Manufacturing Process and Fatigue Life;
提速货车转向架下交叉支撑装置制造工艺与疲劳寿命研究
4.
Analysis & Research on Failure of Frame Braced Bogie for Higher Speed Railway Freight Car;
铁路提速货车转向架交叉支撑装置失效分析研究
5.
pylon diagonal drag brace
吊臂架交叉阻力支撑条
6.
A pillar, rectangular in cross section, supporting an arch or roof.
支柱交叉处的长方形柱子，支撑一个拱顶或屋顶
7.
Influence of value assigning of inner forces in cross-braced frame on its anti-seismic behavior
交叉支撑内力取值方法对结构抗震性能的影响
8.
a device that supports a football off the ground preparatory to the kickoff.
准备踢球时支撑足球离地的装置。
9.
"Entry strip support table, looper roll and four-point centering device. "
进料支撑台,跳动辊,四点对中装置。
10.
Terminal fittings transmit their force in bearing.
端部连接器将其力传到支撑装置上去。
11.
Research and application of the temporary top-supporting device depending on the wall
壁支撑式临时护顶装置的研制与应用
12.
Elimination of Looseness and Impact of the Converter Supporting Equipment under High-Temperatureure
梅钢转炉支撑装置高温松动冲击控制
13.
Lectotype and Improvement of Safety Supporting Device of Dump Truck
自卸汽车安全支撑装置的选型与改进
14.
Optimum design of support devices in large-scale columns (Ⅱ)
大型塔器支撑装置的优化设计(下)
15.
Optimum design of support devices in large-scale columns(Ⅰ)
大型塔器支撑装置的优化设计(上)
16.
A forked device or part.
分叉装置，分叉部分
17.
“Research on Strategy and Management of E-business”, IBM SUR(Shared University Research) Project.
“电子商务的支撑环境”，复旦大学电子商务交叉学科重点课题。
18.
Study on Shear Performance of High Strength Cold-Formed Thin-Walled Steel Framing Walls with Cross-Bracing;
高强冷弯薄壁型钢骨架带交叉支撑墙体抗剪性能研究