1.
Comparison Between Torque Method and Angle Method in Bolt Assembly Technology
螺栓装配技术中扭矩法与转角法比较研究
2.
Steel Bar Embedded Technology for Anchor Bolt Erection on Underwater Equipment
植筋技术用于水下设备地脚螺栓的安装
3.
Installation Technology of Large Diameter Bolt in Wuhan Tianxingzhou Yangtze River Bridge
武汉天兴州长江大桥大直径螺栓安装技术
4.
The method is also proposed on making thread-hole and bolt in interving concerted process, bolt connection as well.
干涉配合螺接过程中螺孔和螺栓的加工方法以及螺栓的安装方法。
5.
Research on Assembly Key Technology of Flexible Gyro Joints;
挠性陀螺柔性器件装配关键技术研究
6.
Place the new pump in position and tighten mounting bolts.
使水泵就位，拧紧装配螺栓。
7.
Force Analysis of Chord Bolts of Type-321 Assembled Steel Bridge
“321”装配式公路钢桥弦杆螺栓受力分析
8.
Research on Screw Joint for Precise Assembly of Miniature Parts
微小型零件精密装配中的螺纹副联接技术研究
9.
The various parts of the car are bolted together.
这辆汽车的各种配件是用螺栓装在一起的.
10.
Quality Control of Screw Connector in Powertrain Assembling
动力总成装配工序的螺栓连接质量控制
11.
" Fasteners--General requirements for blots,screws,studs and nuts"
GB/T16938-1997紧固件螺栓、螺钉、螺柱和螺母通用技术条件
12.
Double Nuts Anti-loosening link Assembly Screwing down Process Theoretic Analysis
双螺母防松时螺栓联接装配拧紧工艺的初步理论分析
13.
Mount restrictor bar into the restrictor bar groove of upper die, mount adjusting bolt for restrictor bar into the bolt hole in the restrictor bar, then mount lower press block, upper press block.
在上模节流棒槽内装入节流棒，将节流棒调节螺栓装配进节流棒的螺丝孔中，再装配上压块。
14.
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
15.
The assemblies of the whole Body is combined by spot welding and Bolting.
整个车身的所有装配件都是由点焊或螺栓组装起来的。
16.
Research and Design on the Backpressure Device and Bolt Assembly System in the Fracture Splitting Equipment of Main Bearing Walls on an Engine Block;
缸体主轴承座裂解加工背压装置及螺栓装配系统研制
17.
screw extractor and drill kit
螺栓取出器套装工具
18.
LOWER TRACK BAR BOLT INSTALLATION
下横拉杆螺栓的安装