1.
In this arrangement, the cam lobes push against round metal cylinders called cam follower.
在这种布置中，凸轮凸角推动凸轮挺杆。
2.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
3.
The valve lifter, a round cylinder, rides on the cam.
气门挺杆为一圆筒体，坐落在凸轮上。
4.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
5.
"After the cam lobe moves out from under the valve lifter, the valve spring forces the valve up onto its seat again."
当凸轮凸角离开气门挺杆,气门弹簧使气门重新回到气门座上。
6.
A rod moved by a cam to operate the valves in an internal-combustion engine.
阀门挺杆通过凸轮转动的杆，用来操纵内燃机的阀门
7.
"With this arrangement, the camshaft is directly below the valve lifter, and no push rods or rocker arms are necessary. "
"在这种装置中,凸轮轴直接装在气门挺杆下,并且不必有推杆或摇臂。"
8.
A projecting cam, as on a rotating shaft, that activates another machine part.
凸轮如转轴上突出的挺杆，使另一个机器零件活动
9.
Analysis and design of transformable cam-five-bar mechanism
可变杆长的凸轮—五杆机构分析与设计
10.
Computation Method of Elastohydrodynamic Lubricant Film Thickness Between Cam and Tappet of IC Engines
内燃机凸轮挺柱间油膜厚度的计算方法
11.
Numerical Simulation of Valve Cam-tappet Contact Stress
配气机构凸轮—挺柱接触应力的数值模拟
12.
locking cam keeper of container end frame
集装箱端架锁凸轮杆插座
13.
Counter Design of Needle-bar Compound Cam in an Eyelet Buttonholer
圆头锁眼机针杆复合凸轮的反求设计
14.
The Analytic Design for a Kind of Constant-width Cam and Link Mechanism;
一种等宽凸轮-连杆机构的解析设计
15.
Study on Cam Box Mechanism of LL680 Rapier Loom in High-speed Condition
LL680剑杆织机凸轮箱高速化研究
16.
Design of Swing Link Cam Mechanism based on ADMAS and Solid Edge
基于ADAMS与Solid Edge的摆杆凸轮机构设计
17.
Creation and Application of the New Cam-linkage Combined Mechanism
一种新型连杆凸轮组合机构及其应用
18.
Design of Cam and Link Pusher Based on MATLAB and Pro/E
基于MATLAB和Pro/E凸轮连杆推送机构设计