1.
Generally Spiral Trajectory Curvature Center of Curvature and Torsion
一般螺线曲率中心轨迹的曲率与挠率
2.
On the Calculation of the Curvature and Torsion of Curves =+a+b
关于曲线=+a+b的曲率和挠率的计算
3.
Equations of Space Curves with Constant Curvature and Torsion;
给定曲率和挠率为常数的空间曲线方程
4.
A Research of the Classification of Space Curve By the Relations between Curvature and Torsion
用曲率和挠率的关系研究空间曲线的分类
5.
Your men will fall by the sword, your warriors in battle.
愕哪卸 ⒈氐乖诘断隆⒛愕挠率俊⒈厮涝谡笊稀
6.
VARIATIONS OF CURVATURE,TORSION AND STRESS OF DOUBLE HELIX WIRE IN 6×7+IWS WIRE ROPE
6×7+IWS双螺旋钢丝曲率和挠率及其应力变化特性
7.
The Deflectional Curvature of the Non - Straight Gradual - Approach Curve and the First and Second Foundation Measure in the Surface;
曲面上非直线的渐近曲线的挠率与第Ⅰ、Ⅱ基本量的关系
8.
Damage Identification of Simply-Supported Beam Bridges Based on Influence Line Curvature of Deflection Differential Values
基于挠度差值影响线曲率的简支梁桥损伤识别
9.
Ticklee, ticklee on the knee,
“挠痒痒，挠痒痒，一挠挠到膝盖上，
10.
The slip displacement increases the curvature, reduces the stiffness, increases the additional moment and consequently leads the increase of deflection.
滑移增大结构曲率,降低构件刚度,增加附加弯矩,从而引起挠度增大。
11.
Methods The flecture strength, hardness and shrinkage were compared in using microwave-cured and water bath-cured denture base resins.
方法采用微波能和水浴两种方法加热固化义齿基托树脂,进行挠曲强度、度和收缩率的对比分析。
12.
Leaf spring Natural blow( front/rear)
静挠度前/后(mm)
13.
flex-vent oil ring
(活塞) 挠性油环
14.
The man with the phone scratched his head unhappily.
那个打电话的人不高兴地挠了挠头，
15.
He scratched his head and prepared to go down town.
他挠了挠头，打算去商业区了。
16.
bending stiffness
抗挠劲度,抗弯硬挺度
17.
quartz flexible servo accelerometer
石英挠性伺服加速度计
18.
maximum allowable deflection of tray column
板式塔的最大容许挠度