1.
Remedy: Check zero point correction of the star and re-adjust if necessary.
方法：检查零点位置是否正确，并且需要时，加以调整。
2.
Iris recognition based on zero-crossing position of wavelet transform and variable-length code matching
基于小波过零点位置不等长编码匹配的虹膜识别
3.
Consider, first, a location 22 miles downwind from ground zero.
首先考虑地面零点顺风方向22哩的位置。
4.
automatic reset
自动复位,自动置零
5.
Numerical examples show that nulls at any sidelobe positions can be rapidly achieved by MDLS method.
计算实例表明，该方法能够在指定的任意副瓣位置迅速生成深零点。
6.
B.ALL undimensioned features shall be located within a tolerance of .005 from datum zeroo.
所有未注的特征相对于基准零点的位置偏差须在0.005之内.
7.
compound drift of gravimeter
重力仪混合零点位移
8.
to adjust to zero value, of an instrument or device.
把工具或装置调整到零位置。
9.
Field "{0}" - The Positional Length property is set to zero.
字段“{0}”- 位置长度属性设置为零。
10.
When the galvanometer reads zero the circuit is in the null-balance position.
当检流计的读数为零时，电路处于零平衡位置。
11.
situated in a particular spot or position.
位于特定的地点或位置。
12.
When the two functions are lined up, their respective zero-time positions coincide along the time axis, t is zero, as shown for position 2 in Fig. 6-15 c.
当两个函数对齐时，它们各自的零时点（t＝0）便在时间轴上重合，如图6-15c位置2所示。
13.
When the two functions are lined up so that their respective zero-time positions coincide along the time axis, t is zero, as shown for position 2 in Fig. 6-15 c.
当两个函数对齐时，它们各自的零时点（t＝0）便在时间轴上重合，如图6-15c位置之所示。
14.
The location you specified does not contain a recognized retail product.
指定的位置没有可识别的零售产品。
15.
balance control device
平衡控制装置零位调整器
16.
Position must be a number greater than or equal to zero.
位置必须是一个大于等于零的数字。
17.
Estimation of Rotor Zero-position Error for PMSM
永磁同步电动机位置传感器零位偏差估计方法
18.
Three-position switch (120 deg. step). Contact positions can be specified.
位置开关（120 度间距）。可指定触点位置。