1.
Defect Solution of Gas-Assisted Molding for Thick-Wall Plastic Part Based on DOE
基于DOE厚壁零件气辅成型缺陷的解决途径
2.
The Research of Instrument for Measurement of Wall-thickness and Wall-thickness Difference of Thin-wall Parts of Variation Curvature Revolving Body;
变曲率回转体薄壁零件壁厚及壁厚差测量仪的研究
3.
Thin-Walled Part of Variable Wall Thickness Machining Modeling and Its Experimental Study
薄壁变壁厚零件切削加工建模及其实验研究
4.
We've known the part assembly , apparent surface , wall thickness and structure of the product from the product assembly drawing supplied by customer .
我们从客户提供的产品组立图中得知产品零件装配，外观面，壁厚，结构。
5.
The relationship between drawing top limitation and characteristics of scallop formation and thickness irregularity along article perimeter is found.
确定了极限拉伸程度与齿槽形成特性和零件周边壁厚差特性间的关系。
6.
Applying Software Repeatedly in the Calculation of Tube's Thickness of the High-pressure Pipage
高压输送管路壁厚计算中的软件复用
7.
Service Life Analysis for the Thick-wall Components of the 600MW Supercritical Boiler
600MW超临界锅炉厚壁部件寿命分析
8.
Analysis on Thickness of Pressure-lubricating Deep Drawing of Magnesium Alloy Cylindrical Cups
镁合金筒形件压力润滑拉深壁厚分析
9.
The ironing process with thinning in wall thickness and reducing in diameter
壁厚变薄直径缩小空心件的变薄拉深
10.
Measurement of Key Dimensions of Large-size and Thin-wall Pieces Based on Vision Inspection Technology;
大尺寸薄壁零件关键尺寸的视觉检测
11.
The Six-jaw Hydraulic Power Chuck and Clamping Thin-walled Components
六爪液压动力卡盘和薄壁零件的夹持
12.
Stability Prediction for High-speed Milling of Thin Walled Structures and Experimental Validation
薄壁零件高速铣削稳定性预测与验证
13.
Research on the Precise NC Milling Technology of Thin-walled Workpieces
薄壁零件精密数控铣削关键技术研究
14.
Research on Influencing Factors of Chatter in High Speed Milling of Thin-walled Workpiece
薄壁零件高速铣削振动影响因素研究
15.
Experimental Study and Theoretical Analysis on Load Carrying Apacity of Cold-Formed Flexural Members with Thicknesses Less Than 2mm;
壁厚小于2mm冷弯薄壁型钢受弯构件承载力试验研究及理论分析
16.
Experimental study on behavior of cold-formed steel flexural members with thickness less than 2mm
壁厚2mm以下冷弯薄壁型钢受弯构件性能试验研究
17.
Enclosures for protection against ionizing radiation Lead shielding units for 50mm and 100mm thick walls?
壁厚为50mm和100mm的防电离辐射包壳的铅屏蔽构件
18.
Production of thick section and high strength casting using low alloy cast iron
利用低合金铸铁生产厚壁高强度铸件的研究