1.
Virtual Design System Research and Executer of Tripod Universal Joint Based on Application of VRML;
基于VRML的三叉杆式万向联轴器虚拟设计系统的研究与实现
2.
The dynamic virtual analysis of the tripod sliding universal joint
三叉杆滑块式万向联轴器动力虚拟分析
3.
The Inside Ball Kinematic Simulation Analysis of the Tripod Sliding Universal Joint Based on ADAMS
基于ADAMS的三叉杆滑块式万向联轴器的内球运动仿真分析
4.
The Research on Equal-strength Design of Large-scale Heavy-load Cross-shaft Universal Clutch
大型重载十字轴式万向联轴器等强度设计研究
5.
Anti-wear Structure of Tripod Sliding Universal Joints and Its Mathematics Modeling
滑移型三叉式联轴器抗磨损结构及数学建模
6.
Synchronizing universal coupling with ball and socket
GB/T7550-1987球笼式同步万向联轴器试验方法
7.
Study on Design Method of Cardan Cross-pin Spindles Based on COM/COM+;
基于COM/COM+组件技术的十字轴式万向联轴器设计方法的研究
8.
flange crossing-transmission shaft universal joint
凸缘叉-传动轴万向节
9.
" Synchronizing universal coupling with ball and socket--Type, foundational parameters and main dimensions"
GB/T7549-1987球笼式同步万向联轴器型式、基本参数和主要尺寸
10.
clutch and shaft coupling (including universal joints)
离合器及联轴节（包括万向节）
11.
Research on the Design of Coupler Used in Rolling Mill;
轧钢机用万向联轴器的设计分析研究
12.
Failure Analysis and Structure Improvement for the Cardan Joint
十字轴万向联轴器的失效分析和结构改进
13.
Driving system consists of gearwheel box, universal shaft coupling and arc-gear synchronous belt, The driving mechanical parts are installed at the bottom, so it can avoid vibration.
传动系统采用齿轮箱、万向轴联轴器、圆弧齿同步带相结合型式，传动构件安装在底板，避震性好。
14.
Driving system consists of gearwheel device, universal joint couplings and synchronous belt with high driving accuracy and low mechanical consumption.
传动系统采用齿轮箱、万向轴联轴器，同步带相结合型式，传动精度高，机械损耗小。
15.
"When the two shafts are at an angle to each other, the bearings in the yokes permit the yokes to swing around on the trunnions with each revolution."
当两轴相互处在同一角度上,主动轴转动时万向节叉上的轴承使万向节叉绕万向节十字轴摆动。
16.
ANALYSIS ON FRACTURE OF UNIVERSAL JOINT CROSSSHAFT OF MELT PUMP AND THE COUNTERMEASURES
造粒机组万向联轴器十字轴轴颈断裂分析及对策
17.
Static Analysis on Planar Twelve-bar Linkages Coupling;
高速大功率多杆径向联轴器的动力学分析
18.
1Driving form: speed-regulate of frequency converter + universal shaft coupling + synchronous belt with high accuracy in synchronism, high in mechanism and guarantee in lifetime of the components.
传动型式：变频器调速+万向联轴器+同步带，同步精度高，机械效率高，构件使用寿命保证。