1.
STUDY ON AND ANALYSIS OF PROBLEM CONCERNING BOLT HARDNESS BEYOND STANDARD SET FOR STEAM TURBINES
汽轮机螺栓硬度超标问题的研究与分析
2.
Analysis of bolt fracture failure for high-pressure main stop valve of turbine
汽轮机高压主汽门螺栓断裂失效分析
3.
The Measuring Method & Application of Cylinder Bolts Extension for Assembling
汽轮机汽缸中分面螺栓伸长量测量方法及应用
4.
Investigation into Diaphragm Bolthole Crack in LP Casing of a 135 MW Steam Turbine
某135MW机组汽轮机低压缸隔板螺栓孔开裂故障分析
5.
Contact analysis of MW wind turbine hub and bearing bolt connection
风力机轮毂和轴承螺栓联接接触分析
6.
Study on the Fracture of the Anchor Bolt and the Vibration of the Ship s Main Engine;
某轮柴油主机振动与地脚螺栓断裂研究
7.
Bend and Craze Analysis of Hoisting Bolt of Aerogenerator Impeller
风力发电机组叶轮吊装螺栓弯曲开裂分析
8.
Large-size bolts assembling and disassembling in hydroturbine maintenance of Gezhouba Hydropower Plant
葛洲坝电厂水轮机检修中的大型螺栓拆装
9.
Assessing the Residual Fatigue Life of the Cylinder Bolt in the Super Pressure Compressor;
超高压压缩机汽缸螺栓剩余疲劳寿命的评估
10.
It's a important join component of hydrogenerator main shaft fasten joint bolt.
水轮发电机主轴联轴螺栓是水轮发电机重要的联接部件。
11.
Recommended flywheel bolt torques are:
飞轮螺栓的推荐扭力为：
12.
New cylinder head bolts should be use
应使用新的汽缸头螺栓。
13.
Remove the engine cylinder head bolts.
拆卸引擎汽缸头螺栓。
14.
Remove the upper flywheel and converter housing bolts and loosen the bottom bolts.
拆卸上部飞轮及转换器外壳螺栓，拧松底部螺栓。
15.
Mechanical property requirements for studs shall be the same as those for bolts.
柱头螺栓的机械性能要求与螺栓相同。
16.
These nuts and bolts hold the wheels on.
这些螺帽和螺栓把轮子固定住了.
17.
These bolts and nuts hold the wheels on.
这些螺栓和螺帽把轮子固定下为。
18.
Remove lower generator mounting bolt and remove generator/vacuum pump from vehicle.
拆去下端发电机安置螺栓，并从汽车上拆去发电机/真空泵。