1.
The structure, work principle and design way of spring safety link were introduced in this paper.
本文介绍了弹簧安全连杆的结构、工作原理及其设计方法。
2.
Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.
拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
3.
Design and Mechanical Analysis of Three Links Constant Hangers
三连杆恒力弹簧吊架的设计与力学分析
4.
The relief valve cover shall be secured with stainless steel bolts and shall utilize a quarter-turn locking joint to capture the spring load of the relief valve.
安全阀阀盖应该采用不锈钢螺栓紧固，应该采用四分之一转锁定连接来所定安全阀的弹簧负载。
5.
Spring loaded safety valves
GB/T12243-1989弹簧直接载荷式安全阀
6.
The relief valve spring will be free inside the body at this point.
这时安全阀弹簧将在阀体自由活动。
7.
The Safety Role of the Spring Lock Washers in the Transmission & Distribution Line
弹簧垫圈在输配电线路中的安全作用
8.
Failure Analysis of the Elastic Spring of the Safety Valve of a Liquefied Oil Gas Storage Tank
液化石油气罐车安全阀弹簧失效分析
9.
rack lever spring
齿条杆式擒纵机构弹簧
10.
The design of the new type outside fall lift spring safety valve
火车槽罐用外置全启式弹簧安全阀的设计
11.
The above connecting bar, springs, rubber balls are all placed in metal tube, casing pipes are fixed to supporting frame's two sides.
以上连杆、弹簧、皮球均放置在金属管内，套管固定在大梁两侧。
12.
Chatter and the solution of the direct spring loaded safety valve used for nuclear power plant
核电站用弹簧式安全阀的颤震现象及解决方案
13.
Compressing the spring rod, the linkage connected mechanically to the rod of the single-acting cylinder turns the fuel regulating shaft to the stop position.
压缩弹簧杆，联动装置机械连接到单作用汽缸的杆上转动燃油调节杆到停止位置。
14.
"There are three types of coil-spring front suspension. In one, the coil spring is located between the upper and lower control arms, and the lower control arm has one point of attachment to the car frame."
有三种螺旋弹簧前悬挂结构:一,螺旋弹簧安装在上、下控制臂之间,下控制臂的一端与车架相连;
15.
Shenyang Auto Sping Factory is a large enterprise specialized in auto leaf spring, torsion bar and axle for light duty vehicle.
沈阳汽车弹簧厂是专业生产汽车钢板弹簧、杆弹簧的大型企业。
16.
Analyzes the cause of full open safety valve spring break built in liquefied petroleum gas railway tanker and describes the method for prevention of spring break.
分析了液化石油气铁路罐车内置全启式安全阀弹簧断裂的原因,介绍了防止弹簧断裂的方法。
17.
Due to the release of pressure when removing the cover, the relief valve spring may eject quickly.
因为在拆卸阀盖时松开压力，安全阀弹簧可能会快速弹出来。
18.
OPTIMUM DESIGN OF AUTOMOTIVE SUSPENSION AND TORSION BAR SPRING
汽车扭杆悬架及扭杆弹簧的优化设计