1.
host system mailbox switch setting
主系统信箱区开关设置
2.
Is the capture hardware properly configured? Check the switch settings and jumpers on the capture device.
捕获硬盘配置是否正确? 请检查捕获设备的开关设置和跳线。
3.
Set the main switch selector to A and set the mode dial to normal mode.
把主选择开关设置在A（自动）,同时把模式盘设置在普通模式。
4.
Limit switches can easily be attached to the yoke of the valve. The torque arm will actuate the switches in open and closed positions.
在阀门的轭架上，可以容易的附加限制开关。转距臂会将开关设置在开启和关闭的位置。
5.
testing equipment for interrupting capability of switchgear
开关设备断流试验装置
6.
Depress switch mounting tabs to remove switch from bezel.
降低开关装置设定，以从玻璃框移去开关。
7.
Set the TAPE/OSC switch to the correct position.
将TAPE/OSC开关设定于正确的位置
8.
Set the main switch selector to the desired operation.
设置主选择开关在所需的操作状态
9.
Will consist of switchgear, metering, possibly transformers, and associated plant.
由开关设备、测量装置、变压器连接组成。
10.
About the Setting of Safety 4-pole Switch for Low-voltage System Overhaul
论低压系统检修安全四极开关的设置
11.
Design of the Balanced Device and Calculation of Balancing Force Characteristic on HV Disconnectors and Earthing Switches
高压隔离开关、接地开关中平衡件的设置与平衡力特性的计算
12.
A modification to a process, such as setting a switch or initializing a routine.
对进程的修改，如设置开关或初始化例程。
13.
Set the flash unit to "A" and set the main switch selector to A (auto).
将闪光灯设置在A并将主选择开关调至A（自动）
14.
Remove all test equipment and open No. 2 shutoff valve of the device.
拆卸所有检测设备，开启装置上的2号关闭阀。
15.
Design Problem about Position of Pedal Arm from Stoplight Switch
踏板臂与刹车灯开关位置偏离的设计问题
16.
Planning and Front-End Software System Developing for Bank Call Center System;
呼叫中心规划设计与银行前置网关开发研究
17.
Study on Setup and Business of China Railway Logistics;
关于中国铁路物流机构设置与业务开展的研究
18.
Thinking about The Undergraduate Course Arrangement of Open Education in TV University;
关于电大开放教育本科课程设置的思考