1.
axially injection forward-wave amplifier tube
轴向注入前向波放大管
2.
Research on Axial Injection System of Cyclotron Virtual Prototyping;
回旋加速器虚拟样机轴向注入系统设计研究
3.
a method of lubricating internal combustion engines in which a pump forces oil into the engine bearings.
通过泵强力向发动机轴承注入润滑油润滑内燃机的方法。
4.
Specification: direction of rotation of output shaft varies with that of input shaft.
说明：当输入轴旋转方向改变，输出轴相应改变。
5.
injected-beam forward amplifier
注入式前向波放大管
6.
He pumped funds into the new project.
他向新工程注入资金。
7.
In order to take lateral flow into account it is necessary to postulate the shape of the bearing.
为了计入横向流动，必需设定轴承形状。
8.
When swinging transmission machine operation, the force constant rotation axis to make efforts before and axial rotation move backward.
当摇摆传动机械运行时，等速旋转入力轴使出力轴向前和向后旋动。
9.
Research on Axial Loading-Settlement Curve of Super-Long Bored Single Pile;
超长钻孔灌注单桩轴向荷载—沉降曲线研究
10.
Study of Axial Bearing Properties of Cast-In-Situ Pile in Xigeda-Rock;
昔格达岩层中灌注桩的轴向承载特性研究
11.
Please note this syncline is of inclined axial plane which has the same dip direction as the limb with gentle dip angle.
请注意，这个向斜构造的轴面是倾斜的，轴面的倾向与具有较缓一翼岩层的倾向一致。
12.
" End-suction centrifugal pumps (rating 16 bar)--Designation, nominal duty point and dimensions"
GB/T5662-1985轴向吸入离心泵(16bar)标记、性能和尺寸
13.
End-suction centrifugal pumps--Baseplate and installation dimensions
GB/T5660-1985轴向吸入离心泵底座尺寸和安装尺寸
14.
Axial Entrance Hydrocyclone for Oil-Water Separation and its Numerical Simulation
轴向入口油水分离水力旋流器及其数值模拟
15.
inject foam into a cavity wall
向空心墙内注入泡沫填料.
16.
An appropriate amount of high-grade grease(bearing 130℃ and being waterproof) is prepacked in the bearings.
轴承已注入适量的高级润滑脂（能承受130℃的高温并具有防水性能）。
17.
A small projection through which grease in a grease gun can be forced into a bearing.
滑油嘴一个小的突起，通过它滑油枪中的润滑油能被注入轴承
18.
Mechanism on Rolling Contact Fatigue Improvement of GCr15 Bearing Steel by Ion Implantation and Deposition;
离子注入与沉积的GCr15轴承钢滚动接触疲劳强化机理研究