1.
The Studies of Biomass Solidifying Technology and Principle with High Pressure on Natural Conditions for Bio-fuel Making;
生物质燃料常温高压致密成型技术及成型机理研究
2.
Preparation of High-purity High-density Alumina Ceramics with Low Temperature Sintering;
高纯高致密氧化铝陶瓷低温常压烧结研究
3.
Made of shaping Polytetrafluoethylene Resin by moulding in ordinary lemperature then through high heat sintering.
将聚四氟乙烯烧树脂在常温下用模压法成型后再经高温烧结制成。
4.
Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.
将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。
5.
Electrosynthesis of B_2O with Diamond-like Structure at Ambient Temperature and Pressure;
金刚石型B20的常温常压电化学合成
6.
Made of pressing Polytetrafluoethylene Resin into various simple shapes of seal in ordinary temperature then through high heat sintering and special treatments.
用聚四氟乙烯树脂在常温下压制各种简单形状的密封件，再经高温烧结后经特殊方法处理制成。
7.
The results show that the multi layer spray deposited pipe blank could be processed by such technologies as extrusion spin or extrusion roll.
采用挤压+压或挤压+制致密化成型工艺可以获得高性能多层喷射沉积耐热铝合金材料。
8.
On the temperature dependence of novel quaternayry ammonium ionic liquids at atmospheric pressure
常压下新型季铵离子液体密度-温度特性及关联
9.
The Study on Biomass Solidifying Pressure and Mathematical Model;
生物质致密成型压力及数学模型的研究
10.
" Dense, shaped refractory products--Determination of cold compressive strength--Part 1: Referee test without packing"
GB/T5072.1-1998致密定形耐火制品常温耐压强度试验方法(无衬垫仲裁试验)
11.
Adopted liquid polysulfide prepolymer cured at high temperature for sealing cap at the first time.
首次采用液体聚硫橡胶制成预聚体再高温硫化成型,压制新型聚硫橡胶密封帽制品。
12.
Prediction Model of Equivalent Drilling Fluid Density at High Temperature and High Pressure
高温高压条件下钻井液当量静态密度预测模型
13.
Analysis on factors inducing abnormal high fracture pressure of deep tight sandstone gas reservoir
深层致密砂岩气藏高异常破裂压力影响因素分析
14.
The metal hard seal fixed on the ball valve divides into the normal temperature and the high temperature, when the application temperature is higher than180℃, please indicate the application temperature the first.
金属硬密封固定球阀分为常温型和高温型，当使用温度大于180℃，订货时应注明使用温度。
15.
Growth of Type IB Diamond Crystal with Multi-seed under High Temperature and High Pressure by Temperature Gradient;
高温高压下IB型宝石级金刚石的多晶种法合成
16.
Compression heating characteristics of foods during ultra high hydrostatic pressure processing
超高静压下食品压致升温规律的研究
17.
Correlation of Density of Monoethylene Glycol with Temperature under Normal Pressure
常压下乙二醇密度—温度相关性的研究
18.
Study on the Relation between Percentage of Moisture of Chopped Corn Stalks and the Force of Room Temperature Compression
玉米秸秆含水率与常温压缩成型压力之间关系的研究