1.
In this paper, the effect of wheel-rail friction force on wheel peeling is researched mainly through the simulation test.
本文主要通过模拟试验研究轮轨摩擦力对车轮剥离的影响。
2.
Discussion on the Issue of Tread-Stripped of DF8B Locomotive Wheel
DF8B机车车轮踏面剥离问题初探
3.
Preliminary Discuss for the Reason of Train Wheel & Tyre Shelling and Flake;
火车车轮轮箍剥离、掉块原因的初步探讨
4.
Peeling is the main type of failure of wheel tread.
剥离是车轮踏面失效的主要类型。
5.
Worn profile tread JM, JM_2 and JM_3 for locomotive wheel and the tread shelled-out
机车轮对JM、JM_2、JM_3磨耗型踏面及其剥离
6.
Chemistry Design of Spalling-Resistant Wheel Steels and the Effect of Si Addition on Spalling Resistance
抗剥离车轮钢的合金设计及Si元素对抗剥离性能的影响
7.
Locating Methods of Peeling and Flat Spots in Detection of Wheel Tread Damages of Railway Wagons
铁路货车车轮踏面伤损检测中剥离与擦伤定位方法
8.
The distance between two wheels on an axle.
轮距车轴上一对车轮之间的距离
9.
Peeling Behavior of Hot-Dipped Galvanizing Alloying Coating on Automobile Steel Sheets
汽车用合金化热镀锌板镀层剥离行为的分析
10.
The car turned over when the rear wheel lost contact with the road.
由于后轮离开道路悬空，汽车翻了。
11.
Distance and speed measurement of intelligent dolly with wheels
轮式智能小车行驶距离和速度的检测
12.
On Tracking Problem of Wheeled Vehicle with Discrete Control Value
控制量离散的轮式小车轨迹跟踪研究
13.
We mainly specialize in making various special bearings for automobile such as tapered roller bearings, wheel bearings, automotive tension bearings and clutch bearings.
本公司主要生产圆锥滚子，汽车轮毂，汽车涨紧轮和汽车离合器等汽车专用轴承为主。
14.
sprayable and strippable protective plastic coatings
塑料防剥离用喷射涂层剥取
15.
hob for cycle wheels (incl. coaster-braking hubs)
脚踏车车轮轮毂（包括倒轮刹车轮毂）
16.
The distance from the center of the front wheel to that of the rear wheel in a motor vehicle, usually expressed in inches.
轴距机动车中从前轮中心到后轮中心间的距离，常用英寸表示
17.
The engine and motor are coupled to the wheels through clutches, and automatic gearbox, and Hy-Vo Chains.
发动机和电动机经离合器自动变速齿轮箱和Hy-Vo链与车轮连接。
18.
By placing the clutch on the driven pulley, the pulley can remain spinning even when the car is stopped.
将离合器安装在从动轮上，即使停车时滑轮也能够连续旋转。