1.
On the Effect of Microstructure and Interstitial Content on Plasticity and Toughness of Near α Titanium Alloy at Cryogenic Temperature;
显微组织和间隙元素对近α钛合金低温塑韧性的影响
2.
Polymers give plastic its ability to be shaped and its strength.
聚合体使塑料具有可塑性和韧性。
3.
The repaired plastic has seventy-five percent of the strength of undamaged plastic.
经修复的塑料的韧性是原塑料的75%。
4.
Method for Determining Elasto-plastic Fracture Toughness of Lce
冰的弹塑性断裂韧性测定方法的研究
5.
Twinning Deformation and Plasticity and Toughness of α-Titanium Alloys;
α钛的孪生变形及其塑性韧性的研究
6.
Plastic Deformation and Strengthening & Toughening of Magnesium Alloy AZ80;
AZ80镁合金的塑性变形与强韧化
7.
Numerical Simulation on Ductile Farcture Considering Micro-Plastic Damage;
考虑材料微观塑性损伤的韧性断裂数值模拟
8.
Study on Thermoplastic Polyurethane Elastomer Toughening PVC
热塑性聚氨酯弹性体增韧聚氯乙烯的研究
9.
Injection Molding Process and Properties of Recycled PP Toughened by POE
POE增韧改性回收PP的注塑成型工艺及其性能
10.
Heat Treatment Process for Improving Plasticity and Impact Property of 7A04 Super-high Strength Al Alloy
提高7A04超硬铝合金塑性和韧性的热处理工艺
11.
Toughening Modification PA6 with Styrenic Thermoplastic Elastomer
苯乙烯类热塑性弹性体增韧尼龙6的研究
12.
Effect of elasticizer on tenacity of several pellicular materials
增塑剂对几种涂膜剂成膜材料韧性的影响研究
13.
Study of the Dispersion and Toughness on the Epoxy Molding Compound with Core-shell Elastic Particles
核壳橡胶在环氧模塑料中分散及增韧改性研究
14.
Reserch on Toughening Modification of Cyanate Ester Resin
热塑性树脂增韧氰酸酯树脂的研究进展
15.
Study on Toughening and Modification of Polycarbonate with Styrenic Thermoplastic Rubber;
苯乙烯型热塑性弹性体增韧改性聚碳酸酯的研究
16.
Enhancement of Toughness and Strength of Polyoxymethylene by Thermoplastic Polyurethane Elastomer and Inorganic Filler;
热塑性聚氨酯弹性体及无机填料增韧增强聚甲醛的研究
17.
Functionalization of Thermoplastic Elastomer by Cracking Initiation and Research of Their Toughening PA66;
裂解引发官能化热塑性弹性体及其增韧尼龙66的研究
18.
The Study on the Experiment of the Dynamic Fracture Toughness of Rate-dependent and Elastic-plastic Materials;
应变率相关弹塑性材料动态断裂韧性的试验研究