1.
FLEXURAL-TORSIONAL ANALYSIS OF CURVED BOX-GIRDERS WITH THE CONSIDERATION OF THE SHEAR LAG EFFECT
曲线箱梁考虑剪滞效应时的弯扭分析
2.
Out-Plane Buckling of Eccentrcally Tensile Members and Tapered Beam-Columns;
拉弯构件及变截面压弯构件弯扭失稳分析
3.
Bending and Torsion Strength Analysis of the 8500TEU Container Vessel;
8500TEU集装箱船整船弯扭强度分析
4.
The Analysis and Discussion of Flexural-torsional Buckling of Thin-walled Steel Beam;
薄壁钢梁弯扭屈曲理论的分析和探讨
5.
The Nonlinear Analysis of Coupled Bending and Torsion Vibration of Internal Combustion Engine Crankshaft
内燃机曲轴弯扭耦合非线性振动分析
6.
SLABS-DISASSEMBLED METHOD OF FLEXURAL-TORSIONAL BUCKLING OF THIN-WALLED OPEN-PROFILE MEMBERS
开口薄壁构件弯扭屈曲的单肢解析化分析方法
7.
APPLICATION OF TRANSFER MATRIX METHOD FOR ANALYZING TORSION-BENDING-COUPLED VIBRATION OF SHIP HULL
迁移矩阵法在船体弯扭耦合振动分析中的应用
8.
Analysis of Checkout Error for Distortion and Flexure Caused by Tapers of Crank Bore and Piston Pin Eye
连杆孔锥度造成的弯曲及扭曲检验误差分析
9.
Finite Element Analysis of Dynamics of Spatially Curved and Twisted Rods
空间弯曲和扭转形杆动态特性的有限元分析
10.
Fluid-structure Interaction Analysis of Bending-torsion Coupling Vibration of Thin-walled Ship Hull;
船体薄壁梁弯扭耦合振动的流固耦合分析
11.
Research of elastic flexure buckling performance of pre-twisted bar under axial pressure
初始扭转轴压杆弯曲屈曲性能有限元验证分析
12.
Bending-Torsion Relativity Analysis of Aqueducts in the South-to-North Water Diversion Project
南水北调工程渡槽结构复合弯扭相关性分析
13.
Flexural-torsional Vibration of Simply Supported Beam Under a Moving Mass
含移动质量块简支梁的弯曲-扭转振动分析
14.
Numerical Analysis and Experimental Research on the Internal Flow Mechanism of the Leading Edge Skewed-Swept Diagonal Rotor
前缘弯掠（扭）斜流转子内流机制的数值分析及实验研究
15.
Linear and Non-linear Analysis of Composite Laminated Box Beams under Pressing, Bending and Torsional Loads;
复合材料层合箱梁在压、弯、扭荷载作用下的线性及非线性分析
16.
Application of Coupled Flexural And Torsional Vibration Model in the Study of Gear Drive Vibration;
弯扭耦合振动模型在齿轮传动系统振动分析中的应用
17.
Study of rotation matrix in flexural-torsional stability and geometrically nonlinear analysis
转动矩阵在弯扭屈曲和几何非线性分析中的研究
18.
Nonlinear analysis on restrained torsion of box-section composite steel-concrete beams under combined flexure and torsion based on COLSYS software
基于COLSYS的组合箱梁约束复合弯扭下的非线性分析