1.
Experimental Study on Drawing and Compressing Area of Forming Limit Diagram for Stainless Steel
不锈钢成形极限曲线图(FLD)拉压区试验研究
2.
Finite Element Simulation for Laser Curve Forming of Sheet Metals;
板料激光曲线弯曲成形的有限元模拟
3.
Research on Wrinkling and Forming Limit of NC Bending Process of Thin-Walled Tube;
薄壁管数控弯曲成形过程失稳起皱及成形极限的研究
4.
Research on Internal Wrinkling and Forming Limit of Strip Metal In-plane Bending under Unequal Compressing;
板带不均匀压下面内弯曲成形过程内缘起皱与成形极限的研究
5.
Forming a curved configuration.
成曲线形的，弯曲的
6.
an arch formed in a continuous curve.
形成一个完美曲线的拱。
7.
The curve theoretically formed by a perfectly flexible, uniformly dense, and inextensible cable suspended from its endpoints.
垂曲线理论上由一条极柔软、密度均匀且长度不变的缆绳从其两端间垂下而形成的曲线
8.
To cause to form an arch or similar curve.
使成拱形使形成拱或类似曲线
9.
Effect of forming angles on formability in single point incremental forming
单点渐进成形中成形角对成形极限的影响
10.
The Research on the Limit Parameters for One-Operation Forming the Conical Part in Deep Drawing;
圆锥形零件一次成形极限参数的研究
11.
Research on Deformation Mechanism and Forming Limits of Tube Inversion;
翻管变形机理及翻管成形极限的研究
12.
The Zero Diffusion Limit for Nonlinear Hyperbolic System with Damping and Diffusion;
带耗散与扩散的非线性双曲系统的零扩散极限
13.
Prediction Method for Ultimate Bearing Capacity of Squeezed Branch Pile Based on Quadratic Trend Curve
支盘桩试桩极限承载力的二次趋势曲线预估法
14.
Research on static ultimate bearing capacity and optimal design for a curved girder bridge
某曲线桥的静力极限承载性能分析与优化设计
15.
Study of Critical Theory about Buckling Forming of Middle Thick-walled Tube Bearing Axial Load;
中厚壁圆管轴压屈曲极限变形理论研究
16.
The Isochronous Curve that the Particle Forms Which along Arbitrarily Oblique Line;
质点沿任意斜线运动形成的等时曲线
17.
FEM Simulation of RR Method Bend-Upset Forging of Heavy Crankshaft;
大型曲轴RR法弯曲镦锻成形有限元模拟
18.
arched: Forming an arch or a curve like that of an arch.
拱形结构的: 形成拱或类似于拱的曲线。